Verified Open Pattern (1.0.0-published)

This pattern includes verified home printable specification files, dual-unit sizing charts, and full cutting guides. Upstream source: Threadline Open Design Studio (CC BY-SA 4.0).

Fleece Pullover Intermediate XS – 3XL

Half-Zip Fleece Pullover

Half-Zip Fleece Pullover. Sourced directly from verified open distributions with authentic rights. Includes complete size tables, ease notes, and illustrated construction steps.

Jump to Downloads Front & Back Views Size & Measurements Fabric & Tools Step-by-Step Instructions

Technical Garment Schematics

Front and back flats illustrating seam lines, hem curves, and design details.

Front Elevation

Back Elevation

Sizing & Measurement Tables

Review both body benchmarks and finished garment ease before cutting your cloth.

Measurement Unit

Toggle between metric and imperial values across all charts

1. Body Measurements Chart

Your physical body dimensions. Measure over undergarments with a snug tape.

Swipe sizes

Size	Bust	Waist	Hip
XS	80 cm	62 cm	88 cm
S	86 cm	68 cm	94 cm
M	92 cm	74 cm	100 cm
L	98 cm	80 cm	106 cm
XL	108 cm	90 cm	116 cm
2XL	118 cm	100 cm	126 cm
3XL	128 cm	110 cm	136 cm

2. Finished Garment Measurements Chart

Dimensions of the sewn garment, including designed wearing ease.

Swipe sizes

Size	Finished Bust	Finished Length	Bottom Hem	Bicep Circumference
XS	100 cm	67 cm	98 cm	34 cm
S	106 cm	69 cm	104 cm	35.5 cm
M	112 cm	71 cm	110 cm	37 cm
L	118 cm	73 cm	116 cm	39 cm
XL	128 cm	75 cm	126 cm	42 cm
2XL	138 cm	77 cm	136 cm	45 cm
3XL	148 cm	79 cm	146 cm	48 cm

Size Selection Guidance

Select size based on chest measurement. For an oversized streetwear fit, choose one size up.

Wearing Ease Explanation

+12 to +18 cm chest ease for athletic mid-layer pullover fit.

Fabric & Materials

Recommended substrates, stretch allowances, yardage requirements, and required notions.

Recommended Fabrics

Polar fleece, microfleece, or sherpa fleece (220–320 gsm)

Polartec or anti-pill polyester fleece (250 gsm)
Microfleece or grid fleece
Heavy loopback French terry

Stretch Requirement: 15–30% crosswise stretch

Notions & Sewing Tools

Ensure you have these ready before starting.

Notions:

Matching polyester all-purpose thread
Ballpoint or jersey needle (size 80/12 or 90/14)
20–25 cm (8–10 in) nylon coil separating or sport zipper
Fusible knit stay tape for zipper opening

Tools Required:

Sewing machine
Fabric shears
Pins or fabric clips
Steam iron and ironing board

Fabric Yardage Requirements

Size Bracket	115 cm (45") Width	150 cm (60") Width
XS – M	1.9 m (2.1 yd)	1.5 m (1.65 yd)
L – XL	2.2 m (2.4 yd)	1.8 m (1.95 yd)
2XL – 3XL	2.6 m (2.85 yd)	2.1 m (2.3 yd)

Seam Allowances & Cutting Layout

Exact seam allowances included in pattern lines, piece list, and cutting discipline.

Standard Seams

10 mm (3/8 in) included on all seams.

Hem Allowance

15 mm (5/8 in) double-fold hem.

Neck & Armhole

6 mm (1/4 in) for neckband or binding attachment.

Pattern Pieces to Cut

Piece Name	Quantity & Orientation	Grainline / Cutting Notes
Pullover Front Body	Cut 1 on Fold in Fleece	Half-zip center front
Pullover Back Body	Cut 1 on Fold in Fleece	Fleece back
Sleeves	Cut 1 Pair in Fleece	Set-in sleeves
Stand Collar	Cut 2 in Fleece (1 Inner, 1 Outer)	Stand collar
Sleeve Cuffs	Cut 1 Pair in Fleece	Fleece wrist cuffs
Bottom Hem Band	Cut 1 on Fold in Fleece	Fleece hem band
Zipper Guard	Cut 1 in Fleece	Chin guard

Fabric Cutting Checklist:

Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.

Printable Pattern Files

Download PDF files for home printing on standard desktop printers.

Download Pattern Files

1.0.0

Direct pattern downloads. No registration, email capture, or paywalls required.

Updated: 2026-03-09

Instructions Available

Complete offline sewing guidebook with dual calibration test squares, yardage charts, pattern piece cut list, numbered steps, and troubleshooting.

15.1 KB • 4 pages

Download (15.1 KB)

A4 Available

Full-scale 1:1 tiled master pattern for A4 paper (21 sheets). Includes dual 50mm/2.0in calibration boxes, assembly map, grainlines, and corner registration crosshairs.

169.0 KB • 21 pages

Download (169.0 KB)

US Letter Available

Full-scale 1:1 tiled master pattern for US Letter paper (22 sheets). Includes dual 50mm/2.0in calibration boxes, assembly map, grainlines, and corner registration crosshairs.

177.3 KB • 22 pages

Download (177.3 KB)

Printer Calibration Test Sheet (Free Single Sheet) 2.4 KB

Print at 100% scale (no fit-to-page) and measure the 50mm and 2-inch test boxes with a hard ruler.

Download Test Sheet

Print Instructions:

Open the downloaded PDF in Adobe Acrobat Reader or a dedicated desktop PDF viewer. In the print dialog, select "Actual Size" or "Custom Scale: 100%". Never select "Fit to Printable Area". Always measure the calibration square on Page 1 before proceeding.

These files are prepared from documented pattern references through a technical drafting workflow. If anything appears incorrect, unclear, or causes a sewing problem, email feedbacksewingpattern@gmail.com. Send pattern feedback.

100% Scale Verification

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Read full printing & calibration guide →

Tile Assembly Instructions

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

Step-by-Step Sewing Instructions

Draft construction notes. Readable online; review against the pattern pieces before sewing.

Shoulder Seams

Stabilize shoulder seams and stitch front and back body panels right sides together using a stretch stitch. Press seams open or toward back.

Assemble Stand Collar & Zipper Guard

Stitch outer collar to body neckline right sides together. Fold zipper guard lengthwise and press. Pin zipper face-down along front slit opening with zipper guard behind left tape.

Install Half-Zip

Stitch zipper tape into front opening using a zipper foot. Fold inner collar down over zipper tape to encase top teeth cleanly and topstitch zipper edges.

Set Sleeves Flat & Stitch Side Seams

Pin sleeve caps into armholes and stitch. Pin front and back together at side seams, matching underarms, and sew continuously from sleeve hem to lower edge.