Naar de inhoud
Threadline Patterns
Nederlands

Fleecetrui met halve rits – Naaipatronen

Fleecetrui met halve rits: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
XS – 3XL
Niveau
Gemiddeld
Versie
1.0.0-published
Bijgewerkt
2026-03-09
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Downloaden: Instructies (PDF · 15.1 KB)Downloaden: A4 (PDF · 169.0 KB)Downloaden: US Letter (PDF · 177.3 KB)
Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

1. Lichaamsmaten

Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.

Veeg door de maten
Maat Borst Taille Heup
XS 80 cm 62 cm 88 cm
S 86 cm 68 cm 94 cm
M 92 cm 74 cm 100 cm
L 98 cm 80 cm 106 cm
XL 108 cm 90 cm 116 cm
2XL 118 cm 100 cm 126 cm
3XL 128 cm 110 cm 136 cm

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Afgewerkte borstomtrek Afgewerkte lengte Zoomwijdte Bovenarmomtrek
XS 100 cm 67 cm 98 cm 34 cm
S 106 cm 69 cm 104 cm 35.5 cm
M 112 cm 71 cm 110 cm 37 cm
L 118 cm 73 cm 116 cm 39 cm
XL 128 cm 75 cm 126 cm 42 cm
2XL 138 cm 77 cm 136 cm 45 cm
3XL 148 cm 79 cm 146 cm 48 cm

Maatkeuze en pasvorm

Select size based on chest measurement. For an oversized streetwear fit, choose one size up.

Toelichting op bewegingsruimte

+12 to +18 cm chest ease for athletic mid-layer pullover fit.

Stof en benodigdheden

Polar fleece, microfleece, or sherpa fleece (220–320 gsm) · 15–30% crosswise stretch

  • Polartec or anti-pill polyester fleece (250 gsm)
  • Microfleece or grid fleece
  • Heavy loopback French terry
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
XS – M1.92.11.51.65
L – XL2.22.41.81.95
2XL – 3XL2.62.852.12.3

Notions

  • Matching polyester all-purpose thread
  • Ballpoint or jersey needle (size 80/12 or 90/14)
  • 20–25 cm (8–10 in) nylon coil separating or sport zipper
  • Fusible knit stay tape for zipper opening

Tools

  • Sewing machine
  • Fabric shears
  • Pins or fabric clips
  • Steam iron and ironing board

Knipplan en patroondelen

10 mm (3/8 in) included on all seams.

15 mm (5/8 in) double-fold hem.

6 mm (1/4 in) for neckband or binding attachment.

  • Pullover Front Body: Cut 1 on Fold in Fleece Half-zip center front
  • Pullover Back Body: Cut 1 on Fold in Fleece Fleece back
  • Sleeves: Cut 1 Pair in Fleece Set-in sleeves
  • Stand Collar: Cut 2 in Fleece (1 Inner, 1 Outer) Stand collar
  • Sleeve Cuffs: Cut 1 Pair in Fleece Fleece wrist cuffs
  • Bottom Hem Band: Cut 1 on Fold in Fleece Fleece hem band
  • Zipper Guard: Cut 1 in Fleece Chin guard

Press fabric before cutting to remove packing folds and pre-shrink fibers.

Align piece grainlines strictly parallel to fabric selvages.

Transfer notch markings with small 3 mm snips into the seam allowance margin.

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

Naai-instructies

1

Shoulder Seams

Stabilize shoulder seams and stitch front and back body panels right sides together using a stretch stitch. Press seams open or toward back.

2

Assemble Stand Collar & Zipper Guard

Stitch outer collar to body neckline right sides together. Fold zipper guard lengthwise and press. Pin zipper face-down along front slit opening with zipper guard behind left tape.

3

Install Half-Zip

Stitch zipper tape into front opening using a zipper foot. Fold inner collar down over zipper tape to encase top teeth cleanly and topstitch zipper edges.

4

Set Sleeves Flat & Stitch Side Seams

Pin sleeve caps into armholes and stitch. Pin front and back together at side seams, matching underarms, and sew continuously from sleeve hem to lower edge.

5

Attach Cuffs and Hem Band

Form cuff and hem band pieces into loops, fold wrong sides together, and serge to sleeve openings and pullover lower edge, stretching evenly.

Problemen oplossen

Seams puckering along stitch line

Thread tension too high or needle blunt

Insert fresh needle and test balance on fabric scrap.

Wavy edge along curved perimeter

Edge was stretched while feeding into machine

Staystitch immediately after cutting and use walking foot.

Bron en licentie

Threadline Open Design Studio (half-zip-fleece-pullover). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.

CC BY-SA 4.0 Threadline Technical Team

https://threadlinepatterns.org

Testinformatie

Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.

sample-pending · verified

Threadline Technical Team · Community Open Source Verification

Engelse bronpaginaContact

Gerelateerde patronen