This pattern includes verified home printable specification files, dual-unit sizing charts, and full cutting guides. Upstream source: Threadline Open Design Studio (CC BY-SA 4.0).
Fitted Ribbed Tank. Sourced directly from verified open distributions with authentic rights. Includes complete size tables, ease notes, and illustrated construction steps.
Front and back flats illustrating seam lines, hem curves, and design details.
Review both body benchmarks and finished garment ease before cutting your cloth.
Toggle between metric and imperial values across all charts
Your physical body dimensions. Measure over undergarments with a snug tape.
Dimensions of the sewn garment, including designed wearing ease.
Select size based on full bust/chest measurement.
-4 to -8 cm negative ease at bust for snug, conforming ribbed silhouette.
Recommended substrates, stretch allowances, yardage requirements, and required notions.
2x1 or 1x1 rib knit with elastane/spandex (220–280 gsm)
Ensure you have these ready before starting.
| Size Bracket | 115 cm (45") Width | 150 cm (60") Width |
|---|---|---|
| XS – M | 0.8 m (0.85 yd) | 0.7 m (0.75 yd) |
| L – XL | 1 m (1.1 yd) | 0.8 m (0.85 yd) |
| 2XL – 3XL | 1.2 m (1.3 yd) | 1 m (1.1 yd) |
Exact seam allowances included in pattern lines, piece list, and cutting discipline.
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
| Piece Name | Quantity & Orientation | Grainline / Cutting Notes |
|---|---|---|
| Front Body | Cut 1 on Fold | Ensure grainline parallel to fold |
| Back Body | Cut 1 on Fold | Transfer neck balance notch |
| Neckline Binding Strip | Cut 1 on true 45° bias | Width: 35 mm, stretch slightly while sewing |
| Armhole Binding Strips | Cut 2 on true 45° bias | Clean-finish underarm binding |
Download PDF files for home printing on standard desktop printers.
Direct pattern downloads. No registration, email capture, or paywalls required.
Complete offline sewing guidebook with dual calibration test squares, yardage charts, pattern piece cut list, numbered steps, and troubleshooting.
Full-scale 1:1 tiled master pattern for A4 paper (18 sheets). Includes dual 50mm/2.0in calibration boxes, assembly map, grainlines, and corner registration crosshairs.
Full-scale 1:1 tiled master pattern for US Letter paper (19 sheets). Includes dual 50mm/2.0in calibration boxes, assembly map, grainlines, and corner registration crosshairs.
Print at 100% scale (no fit-to-page) and measure the 50mm and 2-inch test boxes with a hard ruler.
Open the downloaded PDF in Adobe Acrobat Reader or a dedicated desktop PDF viewer. In the print dialog, select "Actual Size" or "Custom Scale: 100%". Never select "Fit to Printable Area". Always measure the calibration square on Page 1 before proceeding.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Read full printing & calibration guide →Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
Draft construction notes. Readable online; review against the pattern pieces before sewing.
Place the Front Body and Back Body right sides together. If using the optional clear elastic, center it over each shoulder seam without stretching it; stitch the shoulder seams with a stretch-compatible stitch, finish together, and press toward the back.
Join the Neckline Binding Strip ends into a loop, quarter-mark the loop and neckline, and place them right sides together. Stretch only the binding as you stitch, turn it to the wrong side over the seam allowance, and topstitch with a stretch-compatible stitch.
Baste the front and back side seams right sides together and check the fitted tank without over-stretching the rib knit. Make equal adjustments on both sides, then stitch permanently with a stretch-compatible stitch and press the allowances toward the back.
Join each Armhole Binding Strip into a loop, quarter-mark the loop and armhole, and stitch right sides together with even tension. Wrap the binding to the wrong side and topstitch, then compare both armholes to confirm equal stretch and coverage.
Try on the tank and confirm the fitted length. Press the printed hem allowance to the wrong side without flattening the rib texture, then coverstitch or use a narrow zig-zag. Steam lightly and allow the knit to recover before the final fit check.
Solutions for common fitting hurdles and construction errors specific to this garment.
Possible Cause: Thread tension too high or needle blunt
Recommended Fix: Insert fresh needle and test balance on fabric scrap.
Possible Cause: Edge was stretched while feeding into machine
Recommended Fix: Staystitch immediately after cutting and use walking foot.
Aaron Athletic A-Shirt — Verified open pattern specification
Brian Basic Crew Tee Block — Verified open pattern specification
Breanna Fitted Bodice Block — Verified open pattern specification