Aansluitend geribd hemdje: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.
Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.
Wissel tussen centimeters en inches in alle tabellen
Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.
Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.
Select size based on full bust/chest measurement.
-4 to -8 cm negative ease at bust for snug, conforming ribbed silhouette.
2x1 or 1x1 rib knit with elastane/spandex (220–280 gsm) · 30–50% crosswise stretch with 90%+ recovery
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 0.8 | 0.85 | 0.7 | 0.75 |
| L – XL | 1 | 1.1 | 0.8 | 0.85 |
| 2XL – 3XL | 1.2 | 1.3 | 1 | 1.1 |
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
Place the Front Body and Back Body right sides together. If using the optional clear elastic, center it over each shoulder seam without stretching it; stitch the shoulder seams with a stretch-compatible stitch, finish together, and press toward the back.
Join the Neckline Binding Strip ends into a loop, quarter-mark the loop and neckline, and place them right sides together. Stretch only the binding as you stitch, turn it to the wrong side over the seam allowance, and topstitch with a stretch-compatible stitch.
Baste the front and back side seams right sides together and check the fitted tank without over-stretching the rib knit. Make equal adjustments on both sides, then stitch permanently with a stretch-compatible stitch and press the allowances toward the back.
Join each Armhole Binding Strip into a loop, quarter-mark the loop and armhole, and stitch right sides together with even tension. Wrap the binding to the wrong side and topstitch, then compare both armholes to confirm equal stretch and coverage.
Try on the tank and confirm the fitted length. Press the printed hem allowance to the wrong side without flattening the rib texture, then coverstitch or use a narrow zig-zag. Steam lightly and allow the knit to recover before the final fit check.
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
Threadline Open Design Studio (fitted-ribbed-tank). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.
CC BY-SA 4.0 Threadline Technical Team
https://threadlinepatterns.orgPrepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Community Open Source Verification
Tops en hemdjes · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesTops en hemdjes · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesTops en hemdjes · Gemiddeld
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructies