1
Prepare Pocket & Front Bodice
Press top pocket hem under 1 cm then 2 cm, topstitch. Press side/bottom seam allowances under 1 cm. Pin pocket to Left Front and edgestitch in place.
Verified Open Pattern (1.0.0-published)
This pattern includes verified home printable specification files, dual-unit sizing charts, and full cutting guides. License: Drafted by Threadline Patterns. CC BY-SA 4.0 International..
Short-Sleeve Shirt Confident Beginner XS to 3XL (Bust 80–132 cm / 31.5"–52.0")
Camp Collar Resort Shirt
The Camp Collar Shirt is an essential vacation and summer staple across North America and Europe. Featuring a casual one-piece notched Cuban collar that lies flat, a grown-on front button placket, drop shoulders, side seam hem vents, and a patch chest pocket. Designed for light to medium-weight wovens with relaxed ease for comfortable warm-weather layering.
Technical Garment Schematics
Front and back flats illustrating seam lines, hem curves, and design details.
Front Elevation
Back Elevation
Sizing & Measurement Tables
Review both body benchmarks and finished garment ease before cutting your cloth.
Measurement Unit
Toggle between metric and imperial values across all charts
1. Body Measurements Chart
Your physical body dimensions. Measure over undergarments with a snug tape.
Swipe sizes
2. Finished Garment Measurements Chart
Dimensions of the sewn garment, including designed wearing ease.
Swipe sizes
Size Selection Guidance
This shirt is drafted with 16 cm (6.3") of built-in positive ease across the chest for an easy, breezy boxy silhouette. If you prefer a trimmer streetwear fit, choose one size smaller than your body bust measurement.
Wearing Ease Explanation
Generous positive ease of +16 cm (+6.3") at bust and +12 cm (+4.7") at hem. Designed to be worn loose and breezy over skin or a base tank.
Fabric & Materials
Recommended substrates, stretch allowances, yardage requirements, and required notions.
Recommended Fabrics
Lightweight to medium-weight woven fabrics with soft drape
- 100% Washed Linen (140–165 gsm) for casual breathable structure
- Tencel or Lyocell twill for fluid movement and subtle sheen
- Cotton lawn, poplin, or seersucker for crisp classic tailoring
- Rayon challis or viscose for breezy drape
Stretch Requirement: None (0% stretch - stable woven)
Notions & Sewing Tools
Ensure you have these ready before starting.
Notions:
- 5 to 6 shirt buttons (12–15 mm / 1/2 in)
- Fusible featherweight interfacing (0.5 m / 0.6 yd) for collar and facing
- Matching all-purpose sewing thread
Tools Required:
- Sewing machine with buttonhole foot
- Sharp fabric shears or rotary cutter
- Iron and pressing ham
- Chalk marker or washable fabric pen
- Point turner for collar points
Fabric Yardage Requirements
| Size Bracket | 115 cm (45") Width | 150 cm (60") Width |
|---|---|---|
| XS – M | 1.8 m (2 yd) | 1.4 m (1.5 yd) |
| L – XL | 2.1 m (2.3 yd) | 1.6 m (1.8 yd) |
| 2XL – 3XL | 2.4 m (2.6 yd) | 1.9 m (2.1 yd) |
Seam Allowances & Cutting Layout
Exact seam allowances included in pattern lines, piece list, and cutting discipline.
Standard Seams
1.5 cm (5/8 in) included on all main construction seams.
Hem Allowance
2.0 cm (3/4 in) double-turn fold hem.
Neck & Armhole
1.0 cm (3/8 in) on collar and facing seams.
Pattern Pieces to Cut
| Piece Name | Quantity & Orientation | Grainline / Cutting Notes |
|---|---|---|
| Front Bodice with Placket | Cut 1 pair | Straight of grain |
| Back Bodice on Fold | Cut 1 on fold | Straight of grain |
| Camp Collar | Cut 2 (1 interfaced) | Straight of grain |
| Short Sleeve | Cut 1 pair | Straight of grain |
| Chest Pocket | Cut 1 | Straight of grain |
Fabric Cutting Checklist:
- Pre-wash and press fabric to eliminate shrinkage prior to cutting.
- Align grainlines parallel to selvage.
- Apply fusible interfacing to upper collar piece and front facing extensions.
Printable Pattern Files
Download PDF files for home printing on standard desktop printers.
Download Pattern Files
1.0.0Direct pattern downloads. No registration, email capture, or paywalls required.
Updated: 2026-03-01
Instructions Available
Complete offline sewing guidebook with dual calibration test squares, yardage charts, pattern piece cut list, numbered steps, and troubleshooting.
15.3 KB • 4 pages
A4 Available
Full-scale 1:1 tiled master pattern for A4 paper (18 sheets). Includes dual 50mm/2.0in calibration boxes, assembly map, grainlines, and corner registration crosshairs.
134.4 KB • 18 pages
US Letter Available
Full-scale 1:1 tiled master pattern for US Letter paper (20 sheets). Includes dual 50mm/2.0in calibration boxes, assembly map, grainlines, and corner registration crosshairs.
149.5 KB • 20 pages
Printer Calibration Test Sheet (Free Single Sheet) 2.4 KB
Print at 100% scale (no fit-to-page) and measure the 50mm and 2-inch test boxes with a hard ruler.
Print Instructions:
Open the downloaded PDF in Adobe Acrobat Reader or a dedicated desktop PDF viewer. In the print dialog, select "Actual Size" or "Custom Scale: 100%". Never select "Fit to Printable Area". Always measure the calibration square on Page 1 before proceeding.
These files are prepared from documented pattern references through a technical drafting workflow. If anything appears incorrect, unclear, or causes a sewing problem, email feedbacksewingpattern@gmail.com. Send pattern feedback.
100% Scale Verification
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Read full printing & calibration guide → Tile Assembly Instructions
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
Step-by-Step Sewing Instructions
Draft construction notes. Readable online; review against the pattern pieces before sewing.
2
Shoulder Seams
Pin Front and Back bodices right sides together at shoulders. Stitch with 1.5 cm allowance, finish seams, and press toward back.
3
Assemble & Attach Camp Collar
Stitch collar pieces right sides together along outer notched edges. Trim corners, turn right side out, and press. Sandwich collar between neckline and turned facings. Stitch and press.
4
Attach Sleeves Flat
Pin sleeve cap to armhole matching center notch to shoulder seam. Stitch seam with 1.5 cm allowance and finish.
5
Side Seams & Side Vents
Stitch side and sleeve seams in one continuous line, stopping 8 cm above hem to create side vents. Press seam open.
6
Hemming & Buttonholes
Press double-fold hem at sleeves and bottom edge. Stitch. Sew vertical buttonholes on right front and attach buttons to left front.
Troubleshooting & Fit Alterations
Solutions for common fitting hurdles and construction errors specific to this garment.
Problem: Collar lapel does not lie flat
Possible Cause: Facing not pressed or clipped at notch point.
Recommended Fix: Clip diagonal notch at break point and steam press thoroughly over tailor ham.
Problem: Pocket corners look uneven
Possible Cause: Seam allowances unevenly folded.
Recommended Fix: Use a cardstock template to press pocket edges before stitching.
More Free Patterns to Explore
Tailored Button-Up Shirt
View pattern →
Simon Classic Men's Shirt
Simon Classic Men's Shirt — Verified open pattern specification
Tailored Woven Blouse
View pattern →
Simone Classic Tailored Blouse
Simone Classic Tailored Blouse — Verified open pattern specification
Raglan Blouse
View pattern →
Elastic-Neck Blouse
A romantic raglan-sleeve blouse with an adjustable gathered elastic neckline and soft elasticated cuffs