1
Prepare Pocket & Front Bodice
Press top pocket hem under 1 cm then 2 cm, topstitch. Press side/bottom seam allowances under 1 cm. Pin pocket to Left Front and edgestitch in place.
開襟シャツ – 型紙一覧
開襟シャツの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS to 3XL (Bust 80–132 cm / 31.5"–52.0")
- 難易度
- 初級者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-01
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
This shirt is drafted with 16 cm (6.3") of built-in positive ease across the chest for an easy, breezy boxy silhouette. If you prefer a trimmer streetwear fit, choose one size smaller than your body bust measurement.
ゆとりについて
Generous positive ease of +16 cm (+6.3") at bust and +12 cm (+4.7") at hem. Designed to be worn loose and breezy over skin or a base tank.
生地と用具
Lightweight to medium-weight woven fabrics with soft drape · None (0% stretch - stable woven)
- 100% Washed Linen (140–165 gsm) for casual breathable structure
- Tencel or Lyocell twill for fluid movement and subtle sheen
- Cotton lawn, poplin, or seersucker for crisp classic tailoring
- Rayon challis or viscose for breezy drape
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.8 | 2 | 1.4 | 1.5 |
| L – XL | 2.1 | 2.3 | 1.6 | 1.8 |
| 2XL – 3XL | 2.4 | 2.6 | 1.9 | 2.1 |
Notions
- 5 to 6 shirt buttons (12–15 mm / 1/2 in)
- Fusible featherweight interfacing (0.5 m / 0.6 yd) for collar and facing
- Matching all-purpose sewing thread
Tools
- Sewing machine with buttonhole foot
- Sharp fabric shears or rotary cutter
- Iron and pressing ham
- Chalk marker or washable fabric pen
- Point turner for collar points
裁断と型紙パーツ
1.5 cm (5/8 in) included on all main construction seams.
2.0 cm (3/4 in) double-turn fold hem.
1.0 cm (3/8 in) on collar and facing seams.
- Front Bodice with Placket: Cut 1 pair
- Back Bodice on Fold: Cut 1 on fold
- Camp Collar: Cut 2 (1 interfaced)
- Short Sleeve: Cut 1 pair
- Chest Pocket: Cut 1
Pre-wash and press fabric to eliminate shrinkage prior to cutting.
Align grainlines parallel to selvage.
Apply fusible interfacing to upper collar piece and front facing extensions.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
縫製手順
2
Shoulder Seams
Pin Front and Back bodices right sides together at shoulders. Stitch with 1.5 cm allowance, finish seams, and press toward back.
3
Assemble & Attach Camp Collar
Stitch collar pieces right sides together along outer notched edges. Trim corners, turn right side out, and press. Sandwich collar between neckline and turned facings. Stitch and press.
4
Attach Sleeves Flat
Pin sleeve cap to armhole matching center notch to shoulder seam. Stitch seam with 1.5 cm allowance and finish.
5
Side Seams & Side Vents
Stitch side and sleeve seams in one continuous line, stopping 8 cm above hem to create side vents. Press seam open.
6
Hemming & Buttonholes
Press double-fold hem at sleeves and bottom edge. Stitch. Sew vertical buttonholes on right front and attach buttons to left front.
困ったときは
Collar lapel does not lie flat
Facing not pressed or clipped at notch point.
Clip diagonal notch at break point and steam press thoroughly over tailor ham.
Pocket corners look uneven
Seam allowances unevenly folded.
Use a cardstock template to press pocket edges before stitching.
出典とライセンス
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Astrid Lindholm