Naar de inhoud
Threadline Patterns
Nederlands

Traditioneel Japans haorijasje – Naaipatronen

Traditioneel Japans haorijasje: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
XS – 3XL
Niveau
Beginner
Versie
1.0.0-published
Bijgewerkt
2026-03-09
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Downloaden: Instructies (PDF · 14.2 KB)Downloaden: A4 (PDF · 162.7 KB)Downloaden: US Letter (PDF · 162.8 KB)
Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

1. Lichaamsmaten

Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.

Veeg door de maten
Maat Borst Taille Heup
XS 80 cm 62 cm 88 cm
S 86 cm 68 cm 94 cm
M 92 cm 74 cm 100 cm
L 98 cm 80 cm 106 cm
XL 108 cm 90 cm 116 cm
2XL 118 cm 100 cm 126 cm
3XL 128 cm 110 cm 136 cm

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Afgewerkte borstomtrek Afgewerkte lengte Zoomwijdte Bovenarmomtrek
XS 108 cm 78 cm 112 cm 40 cm
S 114 cm 80 cm 118 cm 41.5 cm
M 120 cm 82 cm 124 cm 43 cm
L 126 cm 84 cm 130 cm 45 cm
XL 136 cm 86 cm 140 cm 48 cm
2XL 146 cm 88 cm 150 cm 51 cm
3XL 156 cm 90 cm 160 cm 54 cm

Maatkeuze en pasvorm

Select size based on chest measurement, accounting for mid-layer garments.

Toelichting op bewegingsruimte

+16 to +22 cm chest ease for layering over sweaters and hoodies.

Stof en benodigdheden

Lightweight to medium-weight suitable fabric substrates · None (0% stable woven)

  • Lightweight to medium-weight suitable fabric substrates
  • Pre-washed natural fibers (cotton, linen, or bamboo)
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
XS – M2.22.41.81.95
L – XL2.62.852.12.3
2XL – 3XL33.32.52.75

Notions

  • Matching all-purpose polyester or cotton sewing thread
  • Universal sewing needle (size 80/12)

Tools

  • Sewing machine
  • Fabric shears
  • Pins or fabric clips
  • Steam iron and ironing board

Knipplan en patroondelen

10 mm (3/8 in) included on all seams.

15 mm (5/8 in) double-fold hem.

6 mm (1/4 in) for neckband or binding attachment.

  • Haori Front Body: Cut 1 Pair (Left & Right) Straight grainline parallel to front edge
  • Haori Back Body: Cut 1 Pair Center back seam with French seam finish
  • Wide Kimono Sleeve: Cut 1 Pair Square kimono cut with deep lower armhole opening
  • Continuous Neckband: Cut 1 on fold Folded lengthwise and topstitched along neckline

Press fabric before cutting to remove packing folds and pre-shrink fibers.

Align piece grainlines strictly parallel to fabric selvages.

Transfer notch markings with small 3 mm snips into the seam allowance margin.

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

Naai-instructies

1

Staystitch & Shoulder Seams

Staystitch neckline edges. Align Haori Front Body and Haori Back Body right sides together at shoulder seams, stitch, and press seam allowances open.

2

Attach Continuous Neckband

Fold Continuous Neckband in half lengthwise wrong sides together. Align neckband raw edges to front and neckline opening right sides together, stitch, and press seam allowances inward.

3

Insert Kimono Sleeves

Pin Wide Kimono Sleeves flat to body armhole edges right sides together. Stitch sleeve seams and press seam allowances toward sleeves.

4

Close Side Seams & Hem

Align front and back right sides together. Stitch continuous side and sleeve seams. Turn under 2 cm on sleeve hems and lower body hem, press seam allowances, and topstitch neatly.

Problemen oplossen

Seams puckering along stitch line

Thread tension too high or needle blunt

Insert fresh needle and test balance on fabric scrap.

Wavy edge along curved perimeter

Edge was stretched while feeding into machine

Staystitch immediately after cutting and use walking foot.

Bron en licentie

Threadline Open Design Studio (traditional-haori-jacket). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.

CC BY-SA 4.0 Threadline Technical Team

https://threadlinepatterns.org

Testinformatie

Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.

sample-pending · verified

Threadline Technical Team · Community Open Source Verification

Engelse bronpaginaContact

Gerelateerde patronen