1
Staystitch & Shoulder Seams
Staystitch neckline edges. Align Haori Front Body and Haori Back Body right sides together at shoulder seams, stitch, and press seam allowances open.
伝統的な羽織風ジャケット – 型紙一覧
伝統的な羽織風ジャケットの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS – 3XL
- 難易度
- 初心者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-09
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Select size based on chest measurement, accounting for mid-layer garments.
ゆとりについて
+16 to +22 cm chest ease for layering over sweaters and hoodies.
生地と用具
Lightweight to medium-weight suitable fabric substrates · None (0% stable woven)
- Lightweight to medium-weight suitable fabric substrates
- Pre-washed natural fibers (cotton, linen, or bamboo)
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 2.2 | 2.4 | 1.8 | 1.95 |
| L – XL | 2.6 | 2.85 | 2.1 | 2.3 |
| 2XL – 3XL | 3 | 3.3 | 2.5 | 2.75 |
Notions
- Matching all-purpose polyester or cotton sewing thread
- Universal sewing needle (size 80/12)
Tools
- Sewing machine
- Fabric shears
- Pins or fabric clips
- Steam iron and ironing board
裁断と型紙パーツ
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
- Haori Front Body: Cut 1 Pair (Left & Right) Straight grainline parallel to front edge
- Haori Back Body: Cut 1 Pair Center back seam with French seam finish
- Wide Kimono Sleeve: Cut 1 Pair Square kimono cut with deep lower armhole opening
- Continuous Neckband: Cut 1 on fold Folded lengthwise and topstitched along neckline
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
縫製手順
2
Attach Continuous Neckband
Fold Continuous Neckband in half lengthwise wrong sides together. Align neckband raw edges to front and neckline opening right sides together, stitch, and press seam allowances inward.
3
Insert Kimono Sleeves
Pin Wide Kimono Sleeves flat to body armhole edges right sides together. Stitch sleeve seams and press seam allowances toward sleeves.
4
Close Side Seams & Hem
Align front and back right sides together. Stitch continuous side and sleeve seams. Turn under 2 cm on sleeve hems and lower body hem, press seam allowances, and topstitch neatly.
困ったときは
Seams puckering along stitch line
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Wavy edge along curved perimeter
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
出典とライセンス
Threadline Open Design Studio (traditional-haori-jacket). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.
CC BY-SA 4.0 Threadline Technical Team
https://threadlinepatterns.org検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Community Open Source Verification