Naar de inhoud
Threadline Patterns
Nederlands

Jaeger blazer met enkele knopenrij – Naaipatronen

Jaeger blazer met enkele knopenrij: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
XS – 3XL
Niveau
Gemiddeld
Versie
1.0.0-published
Bijgewerkt
2026-03-09
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Downloaden: Instructies (PDF · 15.1 KB)Downloaden: A4 (PDF · 168.4 KB)Downloaden: US Letter (PDF · 191.6 KB)
Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

1. Lichaamsmaten

Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.

Veeg door de maten
Maat Borst Taille Heup
XS 80 cm 62 cm 88 cm
S 86 cm 68 cm 94 cm
M 92 cm 74 cm 100 cm
L 98 cm 80 cm 106 cm
XL 108 cm 90 cm 116 cm
2XL 118 cm 100 cm 126 cm
3XL 128 cm 110 cm 136 cm

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Afgewerkte borstomtrek Afgewerkte lengte Zoomwijdte Bovenarmomtrek
XS 98 cm 72 cm 106 cm 32 cm
S 104 cm 74 cm 112 cm 33.5 cm
M 110 cm 76 cm 118 cm 35 cm
L 116 cm 78 cm 124 cm 37 cm
XL 126 cm 80 cm 134 cm 40 cm
2XL 136 cm 82 cm 144 cm 43 cm
3XL 146 cm 84 cm 154 cm 46 cm

Maatkeuze en pasvorm

Select size based on chest measurement, accounting for mid-layer garments.

Toelichting op bewegingsruimte

+12 to +16 cm chest ease for structured tailoring over blouses or shirts.

Stof en benodigdheden

Lightweight to medium-weight suitable fabric substrates · None (0% stable woven)

  • Lightweight to medium-weight suitable fabric substrates
  • Pre-washed natural fibers (cotton, linen, or bamboo)
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
XS – M2.42.61.92.1
L – XL2.83.052.32.5
2XL – 3XL3.23.52.72.95

Notions

  • Matching all-purpose polyester or cotton sewing thread
  • Universal sewing needle (size 80/12)

Tools

  • Sewing machine
  • Fabric shears
  • Pins or fabric clips
  • Steam iron and ironing board

Knipplan en patroondelen

15 mm (5/8 in) tailored seam allowance.

40 mm (1 5/8 in) hem allowance.

N/A (Lined collar and tailored set-in armholes).

  • Jacket Front: Cut 1 Pair with Lapel Facing Transfer roll line
  • Jacket Back: Cut 1 Pair (Center Back Seam & Vent) Vent extensions
  • Upper Sleeve: Cut 1 Pair Tailored sleeve head
  • Under Sleeve: Cut 1 Pair Elbow shaping
  • Lapel Facing: Cut 1 Pair Main, 1 Pair Interfacing Roll line facing
  • Collar: Cut 2 in Main, 1 Interfacing Tailored collar
  • Lower Patch Pockets: Cut 2 in Self Fabric Double topstitch

Press suiting wool, linen, or velvet before cutting.

Align piece grainlines strictly parallel to fabric selvages.

Transfer tailored roll lines and pocket markings with tailor's tacks.

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

Naai-instructies

1

Apply Interfacing & Construct Pockets

Apply fusible tailored interfacing to front chest piece, lapels, and upper collar. Hem patch pockets and edge-stitch to marked front locations.

2

Stitch Center Back Seam & Vent

Pin back pieces right sides together. Stitch center back seam down to vent notch. Press seam and fold back vent extensions according to guide marks.

3

Join Shoulder Seams & Collar

Stitch front to back at shoulder seams. Assemble tailored collar, attach to lapel facings, and stitch facing unit around jacket neckline and front edge.

4

Assemble Two-Piece Sleeves

Stitch upper sleeve to under sleeve at front and back elbow seams. Press seams over a tailor's ham. Run gathering stitch across sleeve head.

5

Set in Sleeves & Stitch Side Seams

Pin sleeve into armscye matching notches. Distribute cap ease evenly and stitch. Stitch continuous side seams from hem to underarm.

6

Hem Jacket & Attach Buttons

Turn up 40 mm jacket and sleeve hems with catch-stitch. Press with steam and a clapper. Sew tailored buttonholes and attach jacket buttons.

Problemen oplossen

Seams puckering along stitch line

Thread tension too high or needle blunt

Insert fresh needle and test balance on fabric scrap.

Wavy edge along curved perimeter

Edge was stretched while feeding into machine

Staystitch immediately after cutting and use walking foot.

Bron en licentie

FreeSewing (jaeger-tailored-blazer). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.

MIT / CC BY 4.0 Joost De Cock & FreeSewing Community

https://github.com/freesewing/freesewing

Testinformatie

Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.

community-tested · verified

Joost De Cock & FreeSewing Community · Community Open Source Verification

Engelse bronpaginaContact

Gerelateerde patronen