Naar de inhoud
Threadline Patterns
Nederlands

Wahid klassiek gilet – Naaipatronen

Wahid klassiek gilet: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
XS – 3XL
Niveau
Gemiddeld
Versie
1.0.0-published
Bijgewerkt
2026-03-09
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Downloaden: Instructies (PDF · 14.4 KB)Downloaden: A4 (PDF · 113.1 KB)Downloaden: US Letter (PDF · 99.7 KB)
Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

1. Lichaamsmaten

Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.

Veeg door de maten
Maat Borst Taille Heup
XS 80 cm 62 cm 88 cm
S 86 cm 68 cm 94 cm
M 92 cm 74 cm 100 cm
L 98 cm 80 cm 106 cm
XL 108 cm 90 cm 116 cm
2XL 118 cm 100 cm 126 cm
3XL 128 cm 110 cm 136 cm

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Afgewerkte borstomtrek Afgewerkte lengte Zoomwijdte
XS 92 cm 54 cm 90 cm
S 98 cm 55 cm 96 cm
M 104 cm 56 cm 102 cm
L 110 cm 57 cm 108 cm
XL 120 cm 59 cm 118 cm
2XL 130 cm 61 cm 128 cm
3XL 140 cm 63 cm 138 cm

Maatkeuze en pasvorm

Select size based on chest measurement, accounting for mid-layer garments.

Toelichting op bewegingsruimte

+16 to +22 cm chest ease for layering over sweaters and hoodies.

Stof en benodigdheden

Lightweight to medium-weight suitable fabric substrates · None (0% stable woven)

  • Lightweight to medium-weight suitable fabric substrates
  • Pre-washed natural fibers (cotton, linen, or bamboo)
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
XS – M1.11.20.91
L – XL1.31.41.11.2
2XL – 3XL1.51.651.31.4

Notions

  • Matching all-purpose polyester or cotton sewing thread
  • Universal sewing needle (size 80/12)

Tools

  • Sewing machine
  • Fabric shears
  • Pins or fabric clips
  • Steam iron and ironing board

Knipplan en patroondelen

10 mm (3/8 in) included on all seams.

15 mm (5/8 in) double-fold hem.

N/A (Fully lined garment: enclosed 10 mm seams at armholes and neckline).

  • Waistcoat Front: Cut 2 in Main Wool, 2 in Lining Transfer dart markings and welt pocket placement lines
  • Waistcoat Back: Cut 1 on Fold in Lining Fabric Transfer cinch strap placement markings
  • Pocket Welts: Cut 4 in Main Fabric Interface welt strips for crisp tailored finish
  • Back Cinch Straps: Cut 4 in Lining Fabric Fold and topstitch; attach cinch buckle

Press wool and lining fabrics before cutting.

Align piece grainlines strictly parallel to fabric selvages.

Transfer welt pocket markings using tailor's tacks or chalk on wrong side.

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

Naai-instructies

1

Interface Fronts & Construct Welt Pockets

Apply fusible interfacing to front panels. Construct double welt pockets on lower front panels, press crisp, and secure pocket bags on inside.

2

Assemble Back Cinch Straps

Stitch cinch straps right sides together, turn, press, and topstitch. Thread buckle and baste straps to back side seam markings.

3

Join Shoulder Seams

Stitch front to back at shoulder seams for shell fabric. Repeat for lining fabric. Press seams open.

4

Join Shell to Lining at Neckline and Armholes

Pin shell and lining right sides together. Stitch around front edges, V-neckline, and armholes. Clip curves and understitch where possible.

5

Turn Right Side Out & Stitch Side Seams

Pull fronts through shoulders to turn waistcoat right side out. Align side seams of shell and lining in one continuous pass and stitch.

6

Finish Hem & Install Buttons

Turn up hem, slip-stitch bottom opening closed, and steam press. Sew vertical buttonholes on right front and attach buttons on left front.

Problemen oplossen

Seams puckering along stitch line

Thread tension too high or needle blunt

Insert fresh needle and test balance on fabric scrap.

Wavy edge along curved perimeter

Edge was stretched while feeding into machine

Staystitch immediately after cutting and use walking foot.

Bron en licentie

FreeSewing (wahid-tailored-vest). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.

MIT / CC BY 4.0 Joost De Cock & FreeSewing Community

https://github.com/freesewing/freesewing

Testinformatie

Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.

community-tested · verified

Joost De Cock & FreeSewing Community · Community Open Source Verification

Engelse bronpaginaContact

Gerelateerde patronen