Albert werkschort: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.
Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.
Wissel tussen centimeters en inches in alle tabellen
Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.
Universal adjustable fit suitable for adult chest measurements 80–135 cm.
Generous protective coverage designed to wrap around torso and thighs.
10–14 oz Heavy cotton canvas, denim, or wax duck cloth · None (0% stable woven)
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| One Size | 1.5 | 1.65 | 1.2 | 1.3 |
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
Staystitch the curved side transitions on the Apron Main Body. Turn the side and lower edges to the wrong side in two narrow folds, press the curves smoothly, and topstitch the double-fold hem without stretching the bib.
Turn and stitch the upper edge of the Bib Patch Pocket, then press its side and lower allowances to the wrong side. Transfer the pencil-slot line and reinforce the top and bottom of that line with short backstitches.
Finish the upper edge of the Divided Tool Waist Pocket and press its remaining allowances under. Transfer every printed studio tool-slot line before pinning the pocket to the Apron Main Body.
Topstitch the Bib Patch Pocket and Divided Tool Waist Pocket to their placement marks. Sew each vertical tool-slot division from the lower edge to the pocket opening and bartack the upper end so loaded tools cannot tear the pocket.
Finish both Cross-Back Straps, check that they are equal in length, and place their ends right sides together against the upper bib corners. Stitch and turn the straps upward, then secure each attachment with a reinforced Box-X.
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
FreeSewing (albert-studio-apron). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.
MIT / CC BY 4.0 Joost De Cock & FreeSewing Community
https://github.com/freesewing/freesewingParametric drafting geometry, seam balance, and grading verified with upstream open source community testing.
community-tested · verified
Joost De Cock & FreeSewing Community · Community Open Source Verification
Jassen en werkkleding · Gemiddeld
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesJassen en werkkleding · Gemiddeld
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesJassen en werkkleding · Beginner
Maten: Universal (One Size) · Gepubliceerd
Bekijk patroon en instructies