Shoulder Seams with Clear Elastic
Align Front Bodice and Back Bodice on Fold right sides together. Stitch shoulder seams right sides together, incorporating clear elastic into the seam to prevent sagging. Press seam allowances toward back.
Losvallend T-shirt met V-hals: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.
Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.
Wissel tussen centimeters en inches in alle tabellen
Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.
Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.
Provides 8 cm (3.1") of comfortable positive bust ease. Size down for a body-conscious fit.
Relaxed positive ease of +8 cm (+3.1") across the chest for everyday slouchy comfort.
Knit fabrics with at least 30% 2-way stretch · 30% crosswise stretch with good recovery
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.4 | 1.5 | 1.1 | 1.2 |
| L – XL | 1.6 | 1.8 | 1.3 | 1.4 |
| 2XL – 3XL | 1.9 | 2.1 | 1.5 | 1.6 |
1.0 cm (3/8 in) included for sewing with stretch stitch or serger.
2.0 cm (3/4 in) twin-needle or zigzag hem.
0.6 cm (1/4 in) for neckband attachment.
Lay pattern pieces parallel to stretch grainline.
Cut neckband across greatest stretch.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
Align Front Bodice and Back Bodice on Fold right sides together. Stitch shoulder seams right sides together, incorporating clear elastic into the seam to prevent sagging. Press seam allowances toward back.
Join neckband short ends into a continuous loop. Fold neckband right sides together and stitch center front at a 45-degree angle to create the V miter. Press seam allowances open.
Pin mitered point to center front V. Stretch neckband evenly around neckline and stitch with stretch stitch. Press down.
Insert sleeves flat into armholes right sides together. Stitch side seams in one continuous line right sides together, and press seam allowances.
Turn under 2 cm hem on sleeves and bottom curve. Topstitch with twin needle or narrow zigzag.
Not clipped precisely to needle point.
Clip front bodice V point precisely 1 mm before needle line so seam lays completely flat.
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
Shares the same finished body-block chest, length and hem values as pat-022 by design; neckline, sleeve, facing and CAD paths are distinct.
sample-pending · verified
Threadline Technical Team · Astrid Lindholm
Tops en hemdjes · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesTops en hemdjes · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesTops en hemdjes · Gemiddeld
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructies