Naar de inhoud
Threadline Patterns
Nederlands

Brian basis-T-shirt – Naaipatronen

Brian basis-T-shirt: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
XS – 3XL
Niveau
Beginner
Versie
1.0.0-published
Bijgewerkt
2026-03-09
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Downloaden: Instructies (PDF · 14.2 KB)Downloaden: A4 (PDF · 196.2 KB)Downloaden: US Letter (PDF · 196.3 KB)
Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

1. Lichaamsmaten

Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.

Veeg door de maten
Maat Borst Taille Heup
XS 80 cm 62 cm 88 cm
S 86 cm 68 cm 94 cm
M 92 cm 74 cm 100 cm
L 98 cm 80 cm 106 cm
XL 108 cm 90 cm 116 cm
2XL 118 cm 100 cm 126 cm
3XL 128 cm 110 cm 136 cm

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Afgewerkte borstomtrek Afgewerkte lengte Zoomwijdte Bovenarmomtrek
XS 88 cm 62 cm 94 cm 28 cm
S 94 cm 63 cm 100 cm 30 cm
M 100 cm 64 cm 106 cm 32 cm
L 106 cm 65 cm 112 cm 35 cm
XL 116 cm 66 cm 122 cm 37 cm
2XL 126 cm 67 cm 132 cm 39 cm
3XL 136 cm 68 cm 142 cm 41 cm

Maatkeuze en pasvorm

Select size based on full bust/chest measurement.

Toelichting op bewegingsruimte

+4 to +8 cm positive wearing ease for comfortable drape.

Stof en benodigdheden

Lightweight to medium-weight suitable fabric substrates · 20-40% Stretch

  • Lightweight to medium-weight suitable fabric substrates
  • Pre-washed natural fibers (cotton, linen, or bamboo)
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
XS – M1.41.551.21.3
L – XL1.71.851.41.55
2XL – 3XL22.21.71.85

Notions

  • Matching all-purpose polyester or cotton sewing thread
  • Universal sewing needle (size 80/12)

Tools

  • Sewing machine
  • Fabric shears
  • Pins or fabric clips
  • Steam iron and ironing board

Knipplan en patroondelen

10 mm (3/8 in) included on all seams.

15 mm (5/8 in) double-fold hem.

6 mm (1/4 in) for neckband or binding attachment.

  • Front Body: Cut 1 on Fold Ensure grainline parallel to fold
  • Back Body: Cut 1 on Fold Transfer neck balance notch
  • Short Sleeve: Cut 1 Pair Transfer center cap notch
  • Rib Neckband: Cut 1 in Rib or Self Knit Cut with 70-80% of neck circumference

Press fabric before cutting to remove packing folds and pre-shrink fibers.

Align piece grainlines strictly parallel to fabric selvages.

Transfer notch markings with small 3 mm snips into the seam allowance margin.

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

Naai-instructies

1

Staystitch & Shoulder Seams

Staystitch neckline edge at 6 mm. Place front and back body right sides together, pin shoulder seams, stitch, and press seam allowances towards the back.

2

Prepare & Attach Neckband

Join rib neckband short ends into a loop. Fold in half lengthwise wrong sides together. Quarter-mark band and neckline; stretch band evenly while stitching to neckline curve.

3

Insert Sleeves Flat

Pin short sleeve cap to armhole right sides together, aligning center sleeve notch to shoulder seam. Stitch sleeve cap into armhole with stretch stitch.

4

Stitch Side Seams

Align front and back body and sleeve edges, matching underarm seam intersection. Stitch continuously from sleeve hem to shirt bottom hem.

5

Hem Sleeves and Body

Press sleeve and hem allowances under 20 mm. Stitch using twin needle or zig-zag stretch stitch, and give garment a final steam press.

Problemen oplossen

Seams puckering along stitch line

Thread tension too high or needle blunt

Insert fresh needle and test balance on fabric scrap.

Wavy edge along curved perimeter

Edge was stretched while feeding into machine

Staystitch immediately after cutting and use walking foot.

Bron en licentie

FreeSewing (brian-crew-tee-block). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.

MIT / CC BY 4.0 Joost De Cock & FreeSewing Community

https://github.com/freesewing/freesewing

Testinformatie

Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.

community-tested · verified

Joost De Cock & FreeSewing Community · Community Open Source Verification

Engelse bronpaginaContact

Gerelateerde patronen