Naar de inhoud
Threadline Patterns
Nederlands

Aaron sporthemd – Naaipatronen

Aaron sporthemd: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
XS – 3XL
Niveau
Beginner
Versie
1.0.0-published
Bijgewerkt
2026-03-09
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Downloaden: Instructies (PDF · 14.8 KB)Downloaden: A4 (PDF · 122.5 KB)Downloaden: US Letter (PDF · 129.5 KB)
Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

1. Lichaamsmaten

Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.

Veeg door de maten
Maat Borst Taille Heup
XS 80 cm 62 cm 88 cm
S 86 cm 68 cm 94 cm
M 92 cm 74 cm 100 cm
L 98 cm 80 cm 106 cm
XL 108 cm 90 cm 116 cm
2XL 118 cm 100 cm 126 cm
3XL 128 cm 110 cm 136 cm

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Afgewerkte borstomtrek Afgewerkte lengte Zoomwijdte
XS 88 cm 68 cm 90 cm
S 94 cm 70 cm 96 cm
M 100 cm 72 cm 102 cm
L 106 cm 74 cm 108 cm
XL 116 cm 76 cm 118 cm
2XL 126 cm 78 cm 128 cm
3XL 136 cm 80 cm 138 cm

Maatkeuze en pasvorm

Select size based on full bust/chest measurement.

Toelichting op bewegingsruimte

+4 to +8 cm positive wearing ease for comfortable drape.

Stof en benodigdheden

Lightweight to medium-weight stretch knit (jersey, rib knit, or athletic blend) · 20–30% crosswise stretch with good recovery

  • Cotton jersey with 20–30% stretch
  • Rib knit or modal blend with elastane/spandex
  • Athletic moisture-wicking stretch knit
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
XS – M0.910.80.85
L – XL1.11.20.91
2XL – 3XL1.31.41.11.2

Notions

  • Matching all-purpose polyester sewing thread
  • Ballpoint or stretch needle (size 75/11 or 80/12)

Tools

  • Sewing machine
  • Fabric shears
  • Pins or fabric clips
  • Steam iron and ironing board

Knipplan en patroondelen

10 mm (3/8 in) included on all seams.

15 mm (5/8 in) double-fold hem.

6 mm (1/4 in) for neckband or binding attachment.

  • Front Body: Cut 1 on Fold Ensure grainline parallel to fold
  • Back Body: Cut 1 on Fold Transfer neck balance notch
  • Neckline Binding Strip: Cut 1 on true 45° bias Width: 35 mm, stretch slightly while sewing
  • Armhole Binding Strips: Cut 2 on true 45° bias Clean-finish underarm binding

Press fabric before cutting to remove packing folds and pre-shrink fibers.

Align piece grainlines strictly parallel to fabric selvages.

Transfer notch markings with small 3 mm snips into the seam allowance margin.

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

Naai-instructies

1

Join the Tank Shoulder Seams

Place the Front Body and Back Body right sides together, match the shoulder edges, and stitch with a stretch-compatible stitch. Finish the allowances together and press them toward the back.

2

Bind the Athletic Neckline

Join the short ends of the Neckline Binding Strip to form a loop. Quarter-mark the loop and neckline, place the binding against the right side, and stitch while stretching the binding evenly without stretching the body. Wrap the binding over the seam allowance to the wrong side and topstitch.

3

Close the Tank Side Seams

Place front and back right sides together and match the underarm and hem edges. Stitch each side seam with a stretch-compatible stitch, finish the allowances together, and press them toward the back.

4

Bind Both Armholes

Join each Armhole Binding Strip into a loop. Quarter-mark each loop and armhole, match raw edges with right sides together, and stitch with even tension. Turn the binding to the wrong side and topstitch, keeping both armholes symmetrical.

5

Hem the Athletic A-Shirt

Try on the tank and confirm the finished length. Turn the printed body hem allowance to the wrong side, press without stretching, and topstitch with a coverstitch or narrow zig-zag. Give the neckline, armholes, and hem a final steam press.

Problemen oplossen

Seams puckering along stitch line

Thread tension too high or needle blunt

Insert fresh needle and test balance on fabric scrap.

Wavy edge along curved perimeter

Edge was stretched while feeding into machine

Staystitch immediately after cutting and use walking foot.

Bron en licentie

FreeSewing (aaron-athletic-tank). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.

MIT / CC BY 4.0 Joost De Cock & FreeSewing Community

https://github.com/freesewing/freesewing

Testinformatie

Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.

community-tested · verified

Joost De Cock & FreeSewing Community · Community Open Source Verification

Engelse bronpaginaContact

Gerelateerde patronen