1
Shoulder Seams with Clear Elastic
Align Front Bodice and Back Bodice on Fold right sides together. Stitch shoulder seams right sides together, incorporating clear elastic into the seam to prevent sagging. Press seam allowances toward back.
ゆったりしたVネックTシャツ – 型紙一覧
ゆったりしたVネックTシャツの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS to 3XL (Bust 80–132 cm / 31.5"–52.0")
- 難易度
- 初級者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-01
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Provides 8 cm (3.1") of comfortable positive bust ease. Size down for a body-conscious fit.
ゆとりについて
Relaxed positive ease of +8 cm (+3.1") across the chest for everyday slouchy comfort.
生地と用具
Knit fabrics with at least 30% 2-way stretch · 30% crosswise stretch with good recovery
- Cotton-modal or bamboo jersey (170–200 gsm) for liquid drape
- 100% Slub cotton jersey for casual textured look
- Viscose elastane jersey for fluid movement
- Linen jersey for breathable summer knitwear
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.4 | 1.5 | 1.1 | 1.2 |
| L – XL | 1.6 | 1.8 | 1.3 | 1.4 |
| 2XL – 3XL | 1.9 | 2.1 | 1.5 | 1.6 |
Notions
- Stretch ballpoint or jersey machine needle (size 75/11 or 80/12)
- Polyester thread
- Optional twin-needle for hem
Tools
- Standard sewing machine (or serger/overlocker)
- Clear elastic for stabilizing shoulder seams
裁断と型紙パーツ
1.0 cm (3/8 in) included for sewing with stretch stitch or serger.
2.0 cm (3/4 in) twin-needle or zigzag hem.
0.6 cm (1/4 in) for neckband attachment.
- Front Bodice with V-Neck: Cut 1 on fold
- Back Bodice on Fold: Cut 1 on fold
- Short Sleeve: Cut 1 pair
- Mitered V-Neckband: Cut 1
Lay pattern pieces parallel to stretch grainline.
Cut neckband across greatest stretch.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
縫製手順
2
Prepare Mitered V-Neckband Loop
Join neckband short ends into a continuous loop. Fold neckband right sides together and stitch center front at a 45-degree angle to create the V miter. Press seam allowances open.
3
Attach V-Neckband
Pin mitered point to center front V. Stretch neckband evenly around neckline and stitch with stretch stitch. Press down.
4
Set Sleeves & Side Seams
Insert sleeves flat into armholes right sides together. Stitch side seams in one continuous line right sides together, and press seam allowances.
5
Twin-Needle Hemming
Turn under 2 cm hem on sleeves and bottom curve. Topstitch with twin needle or narrow zigzag.
困ったときは
Puckering at the V-neck tip
Not clipped precisely to needle point.
Clip front bodice V point precisely 1 mm before needle line so seam lays completely flat.
出典とライセンス
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
Shares the same finished body-block chest, length and hem values as pat-022 by design; neckline, sleeve, facing and CAD paths are distinct.
sample-pending · verified
Threadline Technical Team · Astrid Lindholm