Construct Johnny Collar
Stitch Johnny Collar pieces right sides together along outer collar points and edges. Turn right side out, press, and edgestitch.
Retro tricot polotop: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.
Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.
Wissel tussen centimeters en inches in alle tabellen
Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.
Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.
Features 8 cm (3.1") of positive bust ease. Choose standard size for classic polo drape.
Comfortable polo drape with +8 cm (+3.1") bust ease and side vents.
Light to midweight knit fabrics with body · 30% crosswise stretch with good recovery
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.5 | 1.6 | 1.2 | 1.3 |
| L – XL | 1.8 | 2 | 1.4 | 1.5 |
| 2XL – 3XL | 2.1 | 2.3 | 1.7 | 1.9 |
1.0 cm (3/8 in) serger seam.
2.0 cm (3/4 in) twin needle hem.
0.8 cm (5/16 in) for collar.
Interface upper Johnny collar with lightweight knit interfacing.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
Stitch Johnny Collar pieces right sides together along outer collar points and edges. Turn right side out, press, and edgestitch.
Align Front Bodice and Back Bodice on Fold right sides together. Stitch shoulder seams and press seam allowances toward back. Sandwich collar into neckline slit right sides together, stitch with stretch stitch, and enclose raw edges.
Insert short sleeves flat into armholes right sides together. Attach folded sleeve bands to sleeve wrist openings right sides together, stitch, and press seam allowances.
Align front and back bodices right sides together. Stitch continuous side seams right sides together down to side vent notches, and press seam allowances open.
Turn under 2 cm along side vents and lower bottom hem. Press seam allowances and stitch with twin needle or narrow stretch stitch.
Not pressed over tailor ham.
Steam collar firmly over curved tailor ham to set collar stand roll.
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Astrid Lindholm
Tops en hemdjes · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesTops en hemdjes · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesTops en hemdjes · Gemiddeld
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructies