1
Construct Johnny Collar
Stitch Johnny Collar pieces right sides together along outer collar points and edges. Turn right side out, press, and edgestitch.
レトロなニットポロトップス – 型紙一覧
レトロなニットポロトップスの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS to 3XL (Bust 80–132 cm / 31.5"–52.0")
- 難易度
- 初級者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-01
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Features 8 cm (3.1") of positive bust ease. Choose standard size for classic polo drape.
ゆとりについて
Comfortable polo drape with +8 cm (+3.1") bust ease and side vents.
生地と用具
Light to midweight knit fabrics with body · 30% crosswise stretch with good recovery
- Cotton pique (200–240 gsm) for authentic tennis polo texture
- Fine knit rib or interlock jersey
- Cotton-silk or cotton-modal knit for luxury Riviera drape
- Terry cloth knit for vintage resort styling
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.5 | 1.6 | 1.2 | 1.3 |
| L – XL | 1.8 | 2 | 1.4 | 1.5 |
| 2XL – 3XL | 2.1 | 2.3 | 1.7 | 1.9 |
Notions
- Lightweight fusible knit interfacing (0.3 m) for collar
- Ballpoint needle (size 80/12)
- Matching thread
Tools
- Sewing machine with stretch stitch or serger
- Point turner for collar tips
- Iron
裁断と型紙パーツ
1.0 cm (3/8 in) serger seam.
2.0 cm (3/4 in) twin needle hem.
0.8 cm (5/16 in) for collar.
- Front Bodice with V-Placket: Cut 1 on fold
- Back Bodice on Fold: Cut 1 on fold
- Johnny Collar: Cut 2 (1 interfaced)
- Short Sleeve: Cut 1 pair
- Sleeve Hem Bands: Cut 1 pair
Interface upper Johnny collar with lightweight knit interfacing.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
縫製手順
2
Shoulder Seams & Collar Attachment
Align Front Bodice and Back Bodice on Fold right sides together. Stitch shoulder seams and press seam allowances toward back. Sandwich collar into neckline slit right sides together, stitch with stretch stitch, and enclose raw edges.
3
Insert Sleeves & Sleeve Bands
Insert short sleeves flat into armholes right sides together. Attach folded sleeve bands to sleeve wrist openings right sides together, stitch, and press seam allowances.
4
Close Side Seams with Vents
Align front and back bodices right sides together. Stitch continuous side seams right sides together down to side vent notches, and press seam allowances open.
5
Finish Side Vents and Hem
Turn under 2 cm along side vents and lower bottom hem. Press seam allowances and stitch with twin needle or narrow stretch stitch.
困ったときは
Collar flips up at back of neck
Not pressed over tailor ham.
Steam collar firmly over curved tailor ham to set collar stand roll.
出典とライセンス
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Astrid Lindholm