Naar de inhoud
Threadline Patterns
Nederlands

Hortensia canvas boodschappentas – Naaipatronen

Hortensia canvas boodschappentas: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
One Size (Universal)
Niveau
Beginner
Versie
1.0.0-published
Bijgewerkt
2026-03-09
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Downloaden: Instructies (PDF · 11.8 KB)Downloaden: A4 (PDF · 41.8 KB)Downloaden: US Letter (PDF · 50.2 KB)
Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Tasbreedte Tashoogte Tasdiepte Bandlengte
Universal 44 cm 48 cm 14 cm 65 cm

Maatkeuze en pasvorm

Universal One Size craft pattern with seam allowances included.

Toelichting op bewegingsruimte

Reinforced dimensional structure designed for daily carry utility.

Stof en benodigdheden

10 to 12 oz Cotton canvas, denim, or duck cloth · None (0% stable woven)

  • 10 to 12 oz Cotton canvas, denim, or duck cloth
  • Quilting cotton lining
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
One Size0.910.80.85

Notions

  • Matching all-purpose polyester or cotton sewing thread
  • Universal sewing needle (size 80/12)
  • Heavy-duty thread
  • Firm fusible craft interfacing

Tools

  • Sewing machine
  • Fabric shears
  • Pins or fabric clips
  • Steam iron and ironing board

Knipplan en patroondelen

10 mm (3/8 in) included on all seams.

15 mm (5/8 in) double-fold hem.

6 mm (1/4 in) for neckband or binding attachment.

  • Tote Main Body: Cut 2 in Heavy Canvas, Cut 2 in Cotton Lining Boxed corners
  • Heavy Canvas Handles: Cut 2 in Heavy Webbing or Canvas Reinforced box stitch
  • Interior Slip Pocket: Cut 1 in Canvas Patch pocket

Press fabric before cutting to remove packing folds and pre-shrink fibers.

Align piece grainlines strictly parallel to fabric selvages.

Transfer notch markings with small 3 mm snips into the seam allowance margin.

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

Naai-instructies

1

Cut & Prepare Canvas Pieces

Cut canvas body, lining, handles, and pocket panels accurately along straight grainlines.

2

Construct Interior Slip Pocket

Fold under and topstitch upper pocket hem. Press side and bottom edges under 10 mm. Center pocket on one lining panel and edge-stitch sides and bottom.

3

Prepare & Position Handles

Fold canvas handle straps lengthwise, press, and topstitch both long edges at 3 mm. Pin handle raw ends to upper edge of outer canvas panels 12 cm apart.

4

Stitch Outer Body & Box Base Corners

Pin outer panels right sides together. Stitch side seams and bottom seam. Flatten boxed bottom corner cutouts, matching side seam to bottom seam; stitch across corner.

5

Assemble Lining with Turning Opening

Repeat side and bottom seams for lining, leaving a 12 cm opening along bottom edge for turning. Box lining corners.

6

Join Outer to Lining & Finish

Slip outer tote inside lining right sides together. Stitch upper rim perimeter. Turn bag right side out through bottom gap, press rim flat, and topstitch rim at 3 mm and 6 mm.

Problemen oplossen

Seams puckering along stitch line

Thread tension too high or needle blunt

Insert fresh needle and test balance on fabric scrap.

Wavy edge along curved perimeter

Edge was stretched while feeding into machine

Staystitch immediately after cutting and use walking foot.

Bron en licentie

FreeSewing (hortensia-market-tote). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.

MIT / CC BY 4.0 Joost De Cock & FreeSewing Community

https://github.com/freesewing/freesewing

Testinformatie

Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.

community-tested · verified

Joost De Cock & FreeSewing Community · Community Open Source Verification

Engelse bronpaginaContact

Gerelateerde patronen