Naar de inhoud
Threadline Patterns
Nederlands

Lucy aanbindzak – Naaipatronen

Lucy aanbindzak: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
One Size (Universal)
Niveau
Beginner
Versie
4.0.0-published
Bijgewerkt
2026-03-09
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Downloaden: Instructies (PDF · 12.8 KB)Downloaden: A4 (PDF · 34.3 KB)Downloaden: US Letter (PDF · 34.4 KB)
Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Tasbreedte Tashoogte Bandlengte
Universal 25 cm 40 cm 150 cm

Maatkeuze en pasvorm

Universal One Size tie-on pocket. Parametrically drafted with 150 cm (59 in) waist ties to fit comfortably across all adult waist sizes.

Toelichting op bewegingsruimte

Generous 25 x 40 cm teardrop pocket capacity with a 21 cm bound vertical slit allowing easy hand access while seated or standing.

Stof en benodigdheden

Medium-weight linen, cotton calico, drill, or pieced patchwork · None (0% stable woven)

  • Medium-weight linen or cotton calico (main body)
  • Lightweight cotton or unbleached muslin (optional lining)
  • Self-fabric or commercial 12–15 mm (1/2 in) double-fold bias binding
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
One Size0.50.60.50.6

Notions

  • Matching all-purpose sewing thread
  • Universal sewing needle (size 70/10 or 80/12)
  • 2 m (2.2 yd) double-fold bias tape (12–15 mm / 1/2 in wide) for slit and perimeter binding
  • 1.5–2.0 m (1.6–2.2 yd) twill tape or ribbon (15–25 mm / 5/8–1 in wide) for waist ties

Tools

  • Sewing machine
  • Fabric shears or rotary cutter
  • Pins or sewing clips
  • Steam iron and pressing cloth
  • Measuring tape or ruler

Knipplan en patroondelen

10 mm (3/8 in) included on perimeter (or trimmed if bias bound).

Enclosed with bias binding / top waist tape.

  • Pocket Bag: Cut 2 in Fabric (Cut 2 in Lining if lined) Teardrop shape
  • Pocket Slit Binding: Cut 1 in Bias Binding (45 cm / 18 in length) Bound vertical slit
  • Waist Ties & Top Binding: Cut 1 in Twill Tape or Ribbon (150 cm / 59 in length) Continuous waist tie

Press fabric thoroughly before laying out pattern pieces.

Align the pocket bag grainline arrow parallel to the fabric selvage.

Cut two identical pocket bag pieces from main fabric (and two from lining if desired).

Cut the 21 cm vertical slit ONLY in the piece chosen for the pocket front; do NOT cut a slit in the pocket back piece.

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

Naai-instructies

1

Cut Slit and Bind Opening

Carefully cut the 21 cm vertical slit down the center line of the front pocket piece only. Open the slit into a nearly straight line and encase both raw edges with double-fold bias binding. Stitch along the fold from top to bottom, pivoting at the bottom point, and reinforce the bottom point with a tiny zigzag or bar-tack.

2

Join and Finish Pocket Bag Edges

Place the front and back pocket pieces together with wrong sides facing (if binding the perimeter) or right sides facing (if using standard seams). Stitch around the curved side and bottom edges with a 10 mm seam allowance. Encase the perimeter with bias tape, or trim, turn right side out, and press flat.

3

Attach Top Binding and Waist Ties

Find the center point of the 150 cm waist tie tape and match it to the center of the pocket top opening. Sandwich the top raw edges of both front and back pocket pieces inside the folded twill tape or binding. Pin securely across the pocket top width.

4

Stitch Waist Ties and Finish

Starting from one end of the waist tie tape, edge-stitch continuously along the open fold all the way across the pocket top and to the opposite tie end. Fold the raw ends of the tie tape under twice and stitch to finish neatly. Give the completed pocket a final steam press.

Problemen oplossen

Slit puckers at the bottom point

Binding was pulled too tightly around the narrow pivot point

Smooth the slit edge into a nearly straight line before stitching, clip the point margin slightly, and secure with a horizontal bar-tack.

Waist ties twist after washing

Twill tape or self-fabric bias was not pre-shrunk

Pre-wash and press twill tape or fabric strips with steam before sewing to eliminate residual shrink and curl.

Bron en licentie

FreeSewing (@freesewing/lucy). Distributed under MIT / CC BY 4.0. Designer: SeaZeeZee (FreeSewing Community), based on Janet Arnold's Patterns of Fashion 1, p. 73.

MIT / CC BY 4.0 SeaZeeZee (FreeSewing Community) / FreeSewing.org

https://freesewing.org/designs/lucy/

https://github.com/freesewing/freesewing/blob/develop/designs/lucy/LICENSE.md

Testinformatie

Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.

community-tested · verified

SeaZeeZee (FreeSewing Community) · FreeSewing Core Team & Janet Arnold Historical Reference

Engelse bronpaginaContact

Gerelateerde patronen