Naar de inhoud
Threadline Patterns
Nederlands

Florent klassieke pet – Naaipatronen

Florent klassieke pet: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
S – 2XL (Head 54–62 cm)
Niveau
Gemiddeld
Versie
1.0.0-published
Bijgewerkt
2026-03-09
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Downloaden: Instructies (PDF · 14.0 KB)Downloaden: A4 (PDF · 29.4 KB)Downloaden: US Letter (PDF · 29.4 KB)
Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

1. Lichaamsmaten

Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.

Veeg door de maten
Maat Hoofdomtrek
S 54 cm
M 56 cm
L 58 cm
XL 60 cm
2XL 62 cm

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Afgewerkte lengte Zoomwijdte
S 24 cm 55 cm
M 24.5 cm 57 cm
L 25 cm 59 cm
XL 25.5 cm 61 cm
2XL 26 cm 63 cm

Maatkeuze en pasvorm

Select size based on measured head circumference above the eyebrows.

Toelichting op bewegingsruimte

+1.5 cm head ease for all-day comfort.

Stof en benodigdheden

Cotton canvas, denim, wool tweed, or linen · None (0% stable woven)

  • Cotton canvas, denim, wool tweed, or linen
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
S – M0.50.550.40.45
L – 2XL0.60.650.50.55

Notions

  • Matching all-purpose polyester or cotton sewing thread
  • Universal sewing needle (size 80/12)
  • Heavy-duty thread
  • Firm fusible craft interfacing

Tools

  • Sewing machine
  • Fabric shears
  • Pins or fabric clips
  • Steam iron and ironing board

Knipplan en patroondelen

10 mm (3/8 in) included on all seams.

15 mm (5/8 in) double-fold hem.

6 mm (1/4 in) for neckband or binding attachment.

  • Flat Cap Side Crown: Cut 1 Pair in Tweed, 1 Pair in Lining Curved side crown panels
  • Center Crown Strip: Cut 1 on Fold in Tweed, 1 on Fold in Lining Graded center top crown panel
  • Flat Cap Visor Peak: Cut 2 in Tweed, 1 in Rigid Peltex Curved visor peak with firm insert

Press fabric before cutting to remove packing folds and pre-shrink fibers.

Align piece grainlines strictly parallel to fabric selvages.

Transfer notch markings with small 3 mm snips into the seam allowance margin.

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

Naai-instructies

1

Interface and Construct Visor Peak

Insert rigid Peltex/interfacing between upper and lower visor pieces right sides together. Stitch outer curved edge at 6 mm, trim seam allowance, turn right side out, press, and topstitch outer rim.

2

Assemble Main Crown

Stitch curved center crown strip between left and right side crown panels right sides together, matching balance notches. Press seams open over a tailor's ham.

3

Assemble Crown Lining

Repeat crown assembly for lining pieces, pressing seams open neatly.

4

Attach Visor to Crown

Align center mark of finished visor peak with center front seam of outer crown. Baste securely within the seam allowance.

5

Enclose Lining & Finish with Sweatband

Join outer crown and lining around lower edge, encasing the visor seam. Turn right side out, press perimeter, and topstitch internal grosgrain sweatband ribbon into place.

Problemen oplossen

Seams puckering along stitch line

Thread tension too high or needle blunt

Insert fresh needle and test balance on fabric scrap.

Wavy edge along curved perimeter

Edge was stretched while feeding into machine

Staystitch immediately after cutting and use walking foot.

Bron en licentie

FreeSewing (florent-flat-cap). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.

MIT / CC BY 4.0 Joost De Cock & FreeSewing Community

https://github.com/freesewing/freesewing

Testinformatie

Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.

community-tested · verified

Joost De Cock & FreeSewing Community · Community Open Source Verification

Engelse bronpaginaContact

Gerelateerde patronen