1
Cut & Prepare Canvas Pieces
Cut canvas body, lining, handles, and pocket panels accurately along straight grainlines.
Hortensia キャンバストートバッグ – 型紙一覧
Hortensia キャンバストートバッグの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- One Size (Universal)
- 難易度
- 初心者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-09
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Universal One Size craft pattern with seam allowances included.
ゆとりについて
Reinforced dimensional structure designed for daily carry utility.
生地と用具
10 to 12 oz Cotton canvas, denim, or duck cloth · None (0% stable woven)
- 10 to 12 oz Cotton canvas, denim, or duck cloth
- Quilting cotton lining
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| One Size | 0.9 | 1 | 0.8 | 0.85 |
Notions
- Matching all-purpose polyester or cotton sewing thread
- Universal sewing needle (size 80/12)
- Heavy-duty thread
- Firm fusible craft interfacing
Tools
- Sewing machine
- Fabric shears
- Pins or fabric clips
- Steam iron and ironing board
裁断と型紙パーツ
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
- Tote Main Body: Cut 2 in Heavy Canvas, Cut 2 in Cotton Lining Boxed corners
- Heavy Canvas Handles: Cut 2 in Heavy Webbing or Canvas Reinforced box stitch
- Interior Slip Pocket: Cut 1 in Canvas Patch pocket
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
縫製手順
2
Construct Interior Slip Pocket
Fold under and topstitch upper pocket hem. Press side and bottom edges under 10 mm. Center pocket on one lining panel and edge-stitch sides and bottom.
3
Prepare & Position Handles
Fold canvas handle straps lengthwise, press, and topstitch both long edges at 3 mm. Pin handle raw ends to upper edge of outer canvas panels 12 cm apart.
4
Stitch Outer Body & Box Base Corners
Pin outer panels right sides together. Stitch side seams and bottom seam. Flatten boxed bottom corner cutouts, matching side seam to bottom seam; stitch across corner.
5
Assemble Lining with Turning Opening
Repeat side and bottom seams for lining, leaving a 12 cm opening along bottom edge for turning. Box lining corners.
6
Join Outer to Lining & Finish
Slip outer tote inside lining right sides together. Stitch upper rim perimeter. Turn bag right side out through bottom gap, press rim flat, and topstitch rim at 3 mm and 6 mm.
困ったときは
Seams puckering along stitch line
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Wavy edge along curved perimeter
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
出典とライセンス
FreeSewing (hortensia-market-tote). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.
MIT / CC BY 4.0 Joost De Cock & FreeSewing Community
https://github.com/freesewing/freesewing検証について
Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.
community-tested · verified
Joost De Cock & FreeSewing Community · Community Open Source Verification