1
Staystitch & Shoulder Seams
Staystitch neckline edge at 6 mm. Place front and back body right sides together, pin shoulder seams, stitch, and press seam allowances towards the back.
Brian クルーネックTシャツの基本型 – 型紙一覧
Brian クルーネックTシャツの基本型の寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS – 3XL
- 難易度
- 初心者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-09
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Select size based on full bust/chest measurement.
ゆとりについて
+4 to +8 cm positive wearing ease for comfortable drape.
生地と用具
Lightweight to medium-weight suitable fabric substrates · 20-40% Stretch
- Lightweight to medium-weight suitable fabric substrates
- Pre-washed natural fibers (cotton, linen, or bamboo)
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.4 | 1.55 | 1.2 | 1.3 |
| L – XL | 1.7 | 1.85 | 1.4 | 1.55 |
| 2XL – 3XL | 2 | 2.2 | 1.7 | 1.85 |
Notions
- Matching all-purpose polyester or cotton sewing thread
- Universal sewing needle (size 80/12)
Tools
- Sewing machine
- Fabric shears
- Pins or fabric clips
- Steam iron and ironing board
裁断と型紙パーツ
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
- Front Body: Cut 1 on Fold Ensure grainline parallel to fold
- Back Body: Cut 1 on Fold Transfer neck balance notch
- Short Sleeve: Cut 1 Pair Transfer center cap notch
- Rib Neckband: Cut 1 in Rib or Self Knit Cut with 70-80% of neck circumference
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
縫製手順
2
Prepare & Attach Neckband
Join rib neckband short ends into a loop. Fold in half lengthwise wrong sides together. Quarter-mark band and neckline; stretch band evenly while stitching to neckline curve.
3
Insert Sleeves Flat
Pin short sleeve cap to armhole right sides together, aligning center sleeve notch to shoulder seam. Stitch sleeve cap into armhole with stretch stitch.
4
Stitch Side Seams
Align front and back body and sleeve edges, matching underarm seam intersection. Stitch continuously from sleeve hem to shirt bottom hem.
5
Hem Sleeves and Body
Press sleeve and hem allowances under 20 mm. Stitch using twin needle or zig-zag stretch stitch, and give garment a final steam press.
困ったときは
Seams puckering along stitch line
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Wavy edge along curved perimeter
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
出典とライセンス
FreeSewing (brian-crew-tee-block). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.
MIT / CC BY 4.0 Joost De Cock & FreeSewing Community
https://github.com/freesewing/freesewing検証について
Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.
community-tested · verified
Joost De Cock & FreeSewing Community · Community Open Source Verification