Naar de inhoud
Threadline Patterns
Nederlands

Teagan aansluitend T-shirt met ronde hals – Naaipatronen

Teagan aansluitend T-shirt met ronde hals: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
XS – 3XL
Niveau
Beginner
Versie
1.0.0-published
Bijgewerkt
2026-03-09
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Downloaden: Instructies (PDF · 14.9 KB)Downloaden: A4 (PDF · 134.8 KB)Downloaden: US Letter (PDF · 151.8 KB)
Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

1. Lichaamsmaten

Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.

Veeg door de maten
Maat Borst Taille Heup
XS 80 cm 62 cm 88 cm
S 86 cm 68 cm 94 cm
M 92 cm 74 cm 100 cm
L 98 cm 80 cm 106 cm
XL 108 cm 90 cm 116 cm
2XL 118 cm 100 cm 126 cm
3XL 128 cm 110 cm 136 cm

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Afgewerkte borstomtrek Afgewerkte lengte Zoomwijdte Bovenarmomtrek
XS 84 cm 58 cm 88 cm 26 cm
S 90 cm 60 cm 94 cm 27.5 cm
M 96 cm 62 cm 100 cm 29 cm
L 102 cm 64 cm 106 cm 31 cm
XL 112 cm 66 cm 116 cm 34 cm
2XL 122 cm 68 cm 126 cm 37 cm
3XL 132 cm 70 cm 136 cm 40 cm

Maatkeuze en pasvorm

Select size based on full bust/chest measurement.

Toelichting op bewegingsruimte

+4 to +8 cm positive wearing ease for comfortable drape.

Stof en benodigdheden

Cotton-spandex jersey knit (180–220 gsm) · 30–40% crosswise stretch with minimum 80% recovery

  • Cotton-spandex jersey knit with 4-way stretch
  • Bamboo jersey knit with 5% elastane
  • Modal stretch jersey
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
XS – M1.31.41.11.2
L – XL1.51.651.31.4
2XL – 3XL1.81.951.51.65

Notions

  • Matching all-purpose polyester or cotton sewing thread
  • Universal sewing needle (size 80/12)

Tools

  • Sewing machine
  • Fabric shears
  • Pins or fabric clips
  • Steam iron and ironing board

Knipplan en patroondelen

10 mm (3/8 in) included on all seams.

20 mm sleeve and body hem with twin needle or coverstitch.

6 mm (1/4 in) for neckband or binding attachment.

  • Front Body: Cut 1 on Fold Scoop neckline front body
  • Back Body: Cut 1 on Fold High back neckline
  • Short Sleeve: Cut 1 Pair Set-in short sleeves
  • Rib Neckband: Cut 1 Folded rib or self neckband

Press fabric before cutting to remove packing folds and pre-shrink fibers.

Align piece grainlines strictly parallel to fabric selvages.

Transfer notch markings with small 3 mm snips into the seam allowance margin.

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

Naai-instructies

1

Join Shoulder Seams

Place the fitted Front Body and Back Body right sides together, match the shoulder edges, and stitch with a stretch-compatible stitch or serger. Finish the allowances together and press them toward the back.

2

Prepare the Scoop Neckband

Stitch the short ends of the Rib Neckband right sides together to form a loop, press the seam open, and fold the loop lengthwise wrong sides together. Quarter-mark the band and scoop neckline, then stitch the band to the neckline with even stretch so the deep curve lies flat without gathers.

3

Insert Sleeves Flat into the Scoop-Neck Tee

With right sides together, match each Short Sleeve center cap notch to the shoulder seam and match the front and back notches. Ease only the sleeve cap between notches and stitch each sleeve into the armhole flat.

4

Shape the Fitted Side Seams

Fold the tee right sides together and match the underarm intersections. Stitch continuously from each sleeve hem through the underarm and along the shaped body side seam to the hem. Finish the allowances together and press toward the back.

5

Finish the Sleeve and Body Hems

Try on the fitted tee and check that the scoop neckline sits flat. Press the sleeve and body hem allowances to the wrong side and topstitch with a twin needle, coverstitch, or narrow zig-zag without stretching the fabric.

Problemen oplossen

Seams puckering along stitch line

Thread tension too high or needle blunt

Insert fresh needle and test balance on fabric scrap.

Wavy edge along curved perimeter

Edge was stretched while feeding into machine

Staystitch immediately after cutting and use walking foot.

Bron en licentie

FreeSewing (teagan-fitted-tshirt). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.

MIT / CC BY 4.0 Joost De Cock & FreeSewing Community

https://github.com/freesewing/freesewing

Testinformatie

Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.

community-tested · verified

Joost De Cock & FreeSewing Community · Community Open Source Verification

Engelse bronpaginaContact

Gerelateerde patronen