Naar de inhoud
Threadline Patterns
Nederlands

Schuin van draad geknipt hemdje – Naaipatronen

Schuin van draad geknipt hemdje: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
XS to 3XL (Bust 80–132 cm / 31.5"–52.0")
Niveau
Gemiddeld
Versie
1.0.0-published
Bijgewerkt
2026-03-01
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Downloaden: Instructies (PDF · 15.0 KB)Downloaden: A4 (PDF · 103.9 KB)Downloaden: US Letter (PDF · 111.7 KB)
Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

1. Lichaamsmaten

Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.

Veeg door de maten
Maat Borst Taille Heup
XS 80 cm 62 cm 88 cm
S 86 cm 68 cm 94 cm
M 94 cm 76 cm 102 cm
L 102 cm 84 cm 110 cm
XL 112 cm 94 cm 120 cm
2XL 122 cm 104 cm 130 cm
3XL 132 cm 116 cm 142 cm

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Afgewerkte borstomtrek Afgewerkte lengte Zoomwijdte
XS 84 cm 50 cm 96 cm
S 90 cm 51 cm 102 cm
M 98 cm 52.5 cm 110 cm
L 106 cm 54 cm 118 cm
XL 116 cm 55.5 cm 128 cm
2XL 126 cm 57 cm 138 cm
3XL 136 cm 58.5 cm 148 cm

Maatkeuze en pasvorm

Because bias-cut garments expand horizontally when stretched vertically, select size primarily based on full bust with 4 cm (1.5") of positive ease. Hang garment for 24 hours prior to hemming.

Toelichting op bewegingsruimte

Gentle positive ease of +4 cm (+1.5") at bust. Bias cut accommodates natural curves fluidly.

Stof en benodigdheden

Lightweight woven fabrics with fluid, liquid drape · Mechanical stretch only from true 45-degree bias grain

  • Silk crepe de chine or silk satin (16–19 mm) for luxury drape
  • Viscose or rayon twill for everyday fluid movement
  • Cupro or washed sandwashed modal for velvet-matte texture
  • Cotton silk voile for lightweight breathable summer wear
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
XS – M1.41.51.11.2
L – XL1.71.91.31.4
2XL – 3XL22.21.61.8

Notions

  • Microtex sewing machine needle (size 60/8 or 70/10)
  • Fine silk or lightweight polyester thread
  • Loop turner for narrow spaghetti straps
  • Fusible stay tape for stabilizing neckline edges

Tools

  • Sewing machine with fine stitch plate
  • Fine glass-head pins (pins will not pull silk threads)
  • Sharp rotary cutter and self-healing mat
  • Tailor ham and pressing cloth

Knipplan en patroondelen

1.2 cm (1/2 in) designed for neat 6 mm French seams.

1.0 cm (3/8 in) narrow baby rolled hem.

1.0 cm (3/8 in) for enclosed facing.

  • Front Bodice on Bias: Cut 1 on bias
  • Back Bodice on Bias: Cut 1 on bias
  • Front Facing: Cut 1 on bias
  • Back Facing: Cut 1 on bias
  • Bias Spaghetti Straps: Cut 2 strips (2.5 cm wide)

Cut in a single layer with fabric right side up.

Lay grainline arrow strictly parallel to selvage at a 45-degree angle.

Do not pull or stretch fabric edges while pinning or cutting.

Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.

Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.

Naai-instructies

1

Staystitch Neckline & Armholes

Immediately staystitch neckline and armhole curves 6 mm from raw edge to prevent bias stretching.

2

Construct Spaghetti Straps

Fold strap strips in half lengthwise, right sides together. Stitch with 6 mm seam. Turn right side out using loop turner and press.

3

Baste Straps & Attach Facings

Baste straps to front neckline peaks. Stitch facings to front and back necklines right sides together, sandwiching straps. Understitch facing.

4

French Seam Side Construction

Pin front and back wrong sides together. Stitch with 6 mm seam. Trim to 3 mm. Turn right sides together, press, and stitch with 6 mm seam to enclose raw edges.

5

Let Hang & Level Hem

Hang garment on a padded hanger for 24 hours to let bias fibers settle. Trim any uneven hem drops. Sew narrow rolled hem.

Problemen oplossen

Side seams ripple or puckers appear

Stitching stretched the bias grain while feeding.

Loosen presser foot tension and gently hold fabric taut front and back while sewing.

Hem hangs unevenly after sewing

Bias stretched during wear.

Level hem with a hem ruler while wearing the garment before final stitching.

Bron en licentie

Drafted by Threadline Patterns. CC BY-SA 4.0 International.

CC BY-SA 4.0

Testinformatie

Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.

sample-pending · verified

Threadline Technical Team · Astrid Lindholm

Engelse bronpaginaContact

Gerelateerde patronen