1
Staystitch Neckline & Armholes
Immediately staystitch neckline and armhole curves 6 mm from raw edge to prevent bias stretching.
バイアス裁ちのキャミソール – 型紙一覧
バイアス裁ちのキャミソールの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS to 3XL (Bust 80–132 cm / 31.5"–52.0")
- 難易度
- 中級者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-01
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Because bias-cut garments expand horizontally when stretched vertically, select size primarily based on full bust with 4 cm (1.5") of positive ease. Hang garment for 24 hours prior to hemming.
ゆとりについて
Gentle positive ease of +4 cm (+1.5") at bust. Bias cut accommodates natural curves fluidly.
生地と用具
Lightweight woven fabrics with fluid, liquid drape · Mechanical stretch only from true 45-degree bias grain
- Silk crepe de chine or silk satin (16–19 mm) for luxury drape
- Viscose or rayon twill for everyday fluid movement
- Cupro or washed sandwashed modal for velvet-matte texture
- Cotton silk voile for lightweight breathable summer wear
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.4 | 1.5 | 1.1 | 1.2 |
| L – XL | 1.7 | 1.9 | 1.3 | 1.4 |
| 2XL – 3XL | 2 | 2.2 | 1.6 | 1.8 |
Notions
- Microtex sewing machine needle (size 60/8 or 70/10)
- Fine silk or lightweight polyester thread
- Loop turner for narrow spaghetti straps
- Fusible stay tape for stabilizing neckline edges
Tools
- Sewing machine with fine stitch plate
- Fine glass-head pins (pins will not pull silk threads)
- Sharp rotary cutter and self-healing mat
- Tailor ham and pressing cloth
裁断と型紙パーツ
1.2 cm (1/2 in) designed for neat 6 mm French seams.
1.0 cm (3/8 in) narrow baby rolled hem.
1.0 cm (3/8 in) for enclosed facing.
- Front Bodice on Bias: Cut 1 on bias
- Back Bodice on Bias: Cut 1 on bias
- Front Facing: Cut 1 on bias
- Back Facing: Cut 1 on bias
- Bias Spaghetti Straps: Cut 2 strips (2.5 cm wide)
Cut in a single layer with fabric right side up.
Lay grainline arrow strictly parallel to selvage at a 45-degree angle.
Do not pull or stretch fabric edges while pinning or cutting.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
縫製手順
2
Construct Spaghetti Straps
Fold strap strips in half lengthwise, right sides together. Stitch with 6 mm seam. Turn right side out using loop turner and press.
3
Baste Straps & Attach Facings
Baste straps to front neckline peaks. Stitch facings to front and back necklines right sides together, sandwiching straps. Understitch facing.
4
French Seam Side Construction
Pin front and back wrong sides together. Stitch with 6 mm seam. Trim to 3 mm. Turn right sides together, press, and stitch with 6 mm seam to enclose raw edges.
5
Let Hang & Level Hem
Hang garment on a padded hanger for 24 hours to let bias fibers settle. Trim any uneven hem drops. Sew narrow rolled hem.
困ったときは
Side seams ripple or puckers appear
Stitching stretched the bias grain while feeding.
Loosen presser foot tension and gently hold fabric taut front and back while sewing.
Hem hangs unevenly after sewing
Bias stretched during wear.
Level hem with a hem ruler while wearing the garment before final stitching.
出典とライセンス
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Astrid Lindholm