1
Join the Tank Shoulder Seams
Place the Front Body and Back Body right sides together, match the shoulder edges, and stitch with a stretch-compatible stitch. Finish the allowances together and press them toward the back.
Aaron スポーツタンクトップ – 型紙一覧
Aaron スポーツタンクトップの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS – 3XL
- 難易度
- 初心者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-09
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Select size based on full bust/chest measurement.
ゆとりについて
+4 to +8 cm positive wearing ease for comfortable drape.
生地と用具
Lightweight to medium-weight stretch knit (jersey, rib knit, or athletic blend) · 20–30% crosswise stretch with good recovery
- Cotton jersey with 20–30% stretch
- Rib knit or modal blend with elastane/spandex
- Athletic moisture-wicking stretch knit
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 0.9 | 1 | 0.8 | 0.85 |
| L – XL | 1.1 | 1.2 | 0.9 | 1 |
| 2XL – 3XL | 1.3 | 1.4 | 1.1 | 1.2 |
Notions
- Matching all-purpose polyester sewing thread
- Ballpoint or stretch needle (size 75/11 or 80/12)
Tools
- Sewing machine
- Fabric shears
- Pins or fabric clips
- Steam iron and ironing board
裁断と型紙パーツ
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
- Front Body: Cut 1 on Fold Ensure grainline parallel to fold
- Back Body: Cut 1 on Fold Transfer neck balance notch
- Neckline Binding Strip: Cut 1 on true 45° bias Width: 35 mm, stretch slightly while sewing
- Armhole Binding Strips: Cut 2 on true 45° bias Clean-finish underarm binding
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
縫製手順
2
Bind the Athletic Neckline
Join the short ends of the Neckline Binding Strip to form a loop. Quarter-mark the loop and neckline, place the binding against the right side, and stitch while stretching the binding evenly without stretching the body. Wrap the binding over the seam allowance to the wrong side and topstitch.
3
Close the Tank Side Seams
Place front and back right sides together and match the underarm and hem edges. Stitch each side seam with a stretch-compatible stitch, finish the allowances together, and press them toward the back.
4
Bind Both Armholes
Join each Armhole Binding Strip into a loop. Quarter-mark each loop and armhole, match raw edges with right sides together, and stitch with even tension. Turn the binding to the wrong side and topstitch, keeping both armholes symmetrical.
5
Hem the Athletic A-Shirt
Try on the tank and confirm the finished length. Turn the printed body hem allowance to the wrong side, press without stretching, and topstitch with a coverstitch or narrow zig-zag. Give the neckline, armholes, and hem a final steam press.
困ったときは
Seams puckering along stitch line
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Wavy edge along curved perimeter
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
出典とライセンス
FreeSewing (aaron-athletic-tank). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.
MIT / CC BY 4.0 Joost De Cock & FreeSewing Community
https://github.com/freesewing/freesewing検証について
Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.
community-tested · verified
Joost De Cock & FreeSewing Community · Community Open Source Verification