1
Interface Brim & Crown
Fuse medium-to-heavy woven interfacing to outer brim and outer crown pieces for structural rigidity.
リバーシブルのバケットハット – 型紙一覧
リバーシブルのバケットハットの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- S – 2XL (Head 54–62 cm)
- 難易度
- 初心者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-09
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Select size based on measured head circumference above the eyebrows.
ゆとりについて
+1.5 cm head ease for all-day comfort.
生地と用具
Cotton canvas, denim, wool tweed, or linen · None (0% stable woven)
- Cotton canvas, denim, wool tweed, or linen
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| S – M | 0.6 | 0.65 | 0.5 | 0.55 |
| L – 2XL | 0.7 | 0.75 | 0.6 | 0.65 |
Notions
- Matching all-purpose polyester or cotton sewing thread
- Universal sewing needle (size 80/12)
- Heavy-duty thread
- Firm fusible craft interfacing
Tools
- Sewing machine
- Fabric shears
- Pins or fabric clips
- Steam iron and ironing board
裁断と型紙パーツ
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
- Crown Oval: Cut 1 Outer, Cut 1 Lining Interface outer piece
- Side Crown Band: Cut 2 Outer, Cut 2 Lining Curved trapezoid band
- Flared Brim: Cut 4 in Fabric (2 Outer, 2 Lining), Cut 2 in Stiff Interfacing Quilted multi-row topstitching
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
縫製手順
2
Assemble Side Crown Band
Stitch short side seams of side band right sides together. Press seams open. Repeat for lining side band.
3
Attach Crown Oval to Side Band
Quarter-mark crown oval and upper edge of side band. Pin right sides together, easing curves smoothly. Stitch at 6 mm.
4
Assemble Flared Brim
Stitch outer brim halves at side seams. Repeat for lining brim. Place outer and lining brims right sides together, stitch outer perimeter, turn right side out, and press.
5
Quilt Brim & Complete Hat
Topstitch concentric circular rows 6 mm apart across entire brim width. Stitch brim to crown unit, insert lining, hand-stitch or topstitch rim closed.
困ったときは
Seams puckering along stitch line
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Wavy edge along curved perimeter
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
出典とライセンス
Threadline Open Design Studio (reversible-bucket-hat). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.
CC BY-SA 4.0 Threadline Technical Team
https://threadlinepatterns.org検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Community Open Source Verification