Lucy 腰ひも付きポケットの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロードすべての表でセンチメートルとインチを切り替えます
デザイン上のゆとりを含めた、完成した衣服の寸法です。
Universal One Size tie-on pocket. Parametrically drafted with 150 cm (59 in) waist ties to fit comfortably across all adult waist sizes.
Generous 25 x 40 cm teardrop pocket capacity with a 21 cm bound vertical slit allowing easy hand access while seated or standing.
Medium-weight linen, cotton calico, drill, or pieced patchwork · None (0% stable woven)
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| One Size | 0.5 | 0.6 | 0.5 | 0.6 |
10 mm (3/8 in) included on perimeter (or trimmed if bias bound).
Enclosed with bias binding / top waist tape.
Press fabric thoroughly before laying out pattern pieces.
Align the pocket bag grainline arrow parallel to the fabric selvage.
Cut two identical pocket bag pieces from main fabric (and two from lining if desired).
Cut the 21 cm vertical slit ONLY in the piece chosen for the pocket front; do NOT cut a slit in the pocket back piece.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
Carefully cut the 21 cm vertical slit down the center line of the front pocket piece only. Open the slit into a nearly straight line and encase both raw edges with double-fold bias binding. Stitch along the fold from top to bottom, pivoting at the bottom point, and reinforce the bottom point with a tiny zigzag or bar-tack.
Place the front and back pocket pieces together with wrong sides facing (if binding the perimeter) or right sides facing (if using standard seams). Stitch around the curved side and bottom edges with a 10 mm seam allowance. Encase the perimeter with bias tape, or trim, turn right side out, and press flat.
Find the center point of the 150 cm waist tie tape and match it to the center of the pocket top opening. Sandwich the top raw edges of both front and back pocket pieces inside the folded twill tape or binding. Pin securely across the pocket top width.
Starting from one end of the waist tie tape, edge-stitch continuously along the open fold all the way across the pocket top and to the opposite tie end. Fold the raw ends of the tie tape under twice and stitch to finish neatly. Give the completed pocket a final steam press.
Binding was pulled too tightly around the narrow pivot point
Smooth the slit edge into a nearly straight line before stitching, clip the point margin slightly, and secure with a horizontal bar-tack.
Twill tape or self-fabric bias was not pre-shrunk
Pre-wash and press twill tape or fabric strips with steam before sewing to eliminate residual shrink and curl.
FreeSewing (@freesewing/lucy). Distributed under MIT / CC BY 4.0. Designer: SeaZeeZee (FreeSewing Community), based on Janet Arnold's Patterns of Fashion 1, p. 73.
MIT / CC BY 4.0 SeaZeeZee (FreeSewing Community) / FreeSewing.org
https://freesewing.org/designs/lucy/https://github.com/freesewing/freesewing/blob/develop/designs/lucy/LICENSE.md
Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.
community-tested · verified
SeaZeeZee (FreeSewing Community) · FreeSewing Core Team & Janet Arnold Historical Reference