1
Interface Fronts & Construct Welt Pockets
Apply fusible interfacing to front panels. Construct double welt pockets on lower front panels, press crisp, and secure pocket bags on inside.
Wahid クラシックベスト – 型紙一覧
Wahid クラシックベストの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS – 3XL
- 難易度
- 中級者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-09
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Select size based on chest measurement, accounting for mid-layer garments.
ゆとりについて
+16 to +22 cm chest ease for layering over sweaters and hoodies.
生地と用具
Lightweight to medium-weight suitable fabric substrates · None (0% stable woven)
- Lightweight to medium-weight suitable fabric substrates
- Pre-washed natural fibers (cotton, linen, or bamboo)
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.1 | 1.2 | 0.9 | 1 |
| L – XL | 1.3 | 1.4 | 1.1 | 1.2 |
| 2XL – 3XL | 1.5 | 1.65 | 1.3 | 1.4 |
Notions
- Matching all-purpose polyester or cotton sewing thread
- Universal sewing needle (size 80/12)
Tools
- Sewing machine
- Fabric shears
- Pins or fabric clips
- Steam iron and ironing board
裁断と型紙パーツ
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
N/A (Fully lined garment: enclosed 10 mm seams at armholes and neckline).
- Waistcoat Front: Cut 2 in Main Wool, 2 in Lining Transfer dart markings and welt pocket placement lines
- Waistcoat Back: Cut 1 on Fold in Lining Fabric Transfer cinch strap placement markings
- Pocket Welts: Cut 4 in Main Fabric Interface welt strips for crisp tailored finish
- Back Cinch Straps: Cut 4 in Lining Fabric Fold and topstitch; attach cinch buckle
Press wool and lining fabrics before cutting.
Align piece grainlines strictly parallel to fabric selvages.
Transfer welt pocket markings using tailor's tacks or chalk on wrong side.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
縫製手順
2
Assemble Back Cinch Straps
Stitch cinch straps right sides together, turn, press, and topstitch. Thread buckle and baste straps to back side seam markings.
3
Join Shoulder Seams
Stitch front to back at shoulder seams for shell fabric. Repeat for lining fabric. Press seams open.
4
Join Shell to Lining at Neckline and Armholes
Pin shell and lining right sides together. Stitch around front edges, V-neckline, and armholes. Clip curves and understitch where possible.
5
Turn Right Side Out & Stitch Side Seams
Pull fronts through shoulders to turn waistcoat right side out. Align side seams of shell and lining in one continuous pass and stitch.
6
Finish Hem & Install Buttons
Turn up hem, slip-stitch bottom opening closed, and steam press. Sew vertical buttonholes on right front and attach buttons on left front.
困ったときは
Seams puckering along stitch line
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Wavy edge along curved perimeter
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
出典とライセンス
FreeSewing (wahid-tailored-vest). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.
MIT / CC BY 4.0 Joost De Cock & FreeSewing Community
https://github.com/freesewing/freesewing検証について
Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.
community-tested · verified
Joost De Cock & FreeSewing Community · Community Open Source Verification