Naar de inhoud
Threadline Patterns
Nederlands

Losvallende geweven top – Naaipatronen

Losvallende geweven top: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
XS to 3XL (Bust 80–132 cm / 31.5"–52.0")
Niveau
Beginner
Versie
1.0.0-published
Bijgewerkt
2026-03-01
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Downloaden: Instructies (PDF · 15.6 KB)Downloaden: A4 (PDF · 132.8 KB)Downloaden: US Letter (PDF · 149.5 KB)
Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

1. Lichaamsmaten

Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.

Veeg door de maten
Maat Borst Taille Heup
XS 80 cm 62 cm 88 cm
S 86 cm 68 cm 94 cm
M 94 cm 76 cm 102 cm
L 102 cm 84 cm 110 cm
XL 112 cm 94 cm 120 cm
2XL 122 cm 104 cm 130 cm
3XL 132 cm 116 cm 142 cm

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Afgewerkte borstomtrek Afgewerkte lengte Zoomwijdte Bovenarmomtrek
XS 96 cm 57 cm 100 cm 35 cm
S 102 cm 58 cm 106 cm 36.5 cm
M 110 cm 59.5 cm 114 cm 38.5 cm
L 118 cm 61 cm 122 cm 41 cm
XL 129 cm 62.5 cm 133 cm 44 cm
2XL 139 cm 64 cm 143 cm 47 cm
3XL 149 cm 65.5 cm 153 cm 50 cm

Maatkeuze en pasvorm

This design features intentional oversized ease (+16 cm / 6.3" at bust). Check the finished garment measurements to select your preferred silhouette: choose your standard size for a fashionable relaxed boxy look, or size down one size for a more tailored profile.

Toelichting op bewegingsruimte

+16 cm to +17 cm (+6.3" to +6.7") ease throughout bust and chest; straight-cut profile with side vent openings for clean draping over high-waisted trousers.

Stof en benodigdheden

Medium-weight woven fabrics with body and drape · None (0% stretch)

  • Mid-weight Linen (160–190 gsm) for natural texture and crisp angles
  • Cotton Chambray or Oxford cloth for classic casual structure
  • Tencel / Lyocell twill for luxurious fluid drape
  • Cotton Poplin for clean lines and modern architectural shape
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
XS – M1.41.51.11.2
L – XL1.71.91.31.4
2XL – 3XL22.21.61.75

Notions

  • Matching all-purpose polyester or cotton thread
  • Lightweight fusible woven interfacing (0.4 m / 0.5 yd) for neck facings
  • Optional: edge-tape interfacing for shoulder stabilization

Tools

  • Sewing machine with size 80/12 universal needle
  • Iron and pressing board
  • Tailor's chalk or disappearing ink pen
  • Pinking shears or serger for internal seam finishing

Knipplan en patroondelen

1.5 cm (5/8") for shoulder and side seams.

3.0 cm (1 1/4") for body hem and 2.5 cm (1") for sleeve cuff hems.

1.0 cm (3/8") for neck facing seam allowance.

  • Front Bodice with Cap Sleeves: Cut 1 on fold Boatneck opening; mark shoulder notches
  • Back Bodice with Cap Sleeves: Cut 1 on fold Mirrors front silhouette with higher neck curve
  • Front Neck Facing: Cut 1 on fold fabric + 1 interfacing Interface before sewing
  • Back Neck Facing: Cut 1 on fold fabric + 1 interfacing Interface before sewing

Ensure grainline runs vertical down center front and center back folds.

Fuse interfacing to facings using a dry press cloth before cutting out curved facing pieces to avoid distortion.

Clip small 3 mm notches into the sleeve cuff hem lines.

Print Page 1 at 100% scale (no scaling / actual size). Measure test calibration square before printing complete packet.

Align numbered grid borders and diamond registration pins. Tape sheets together without overlapping uncut paper.

Naai-instructies

1

Interface and Assemble Facings

Apply fusible interfacing to the wrong sides of Front and Back Neck Facings. With right sides together, stitch facings at shoulder seams using 1.0 cm (3/8") seam allowance. Press seams open. Finish outer raw edge of facing with serger or small turned-and-stitched edge.

Technique Tip: Avoid stretching facing curves while handling.
2

Join Shoulder / Sleeve Top Seams

With right sides together, pin Front and Back Bodice along continuous shoulder and upper sleeve seams. Stitch at 1.5 cm (5/8"). Finish allowances and press toward back.

Technique Tip: Insert clear elastic or stay tape along back shoulder to prevent sagging over time.
3

Attach Neck Facing and Understitch

Pin facing to garment neckline right sides together, aligning shoulder seams and center notches. Stitch at 1.0 cm (3/8"). Clip curves at 1.5 cm intervals. Press seam allowances toward facing, then understitch facing 2 mm from seam. Turn facing inside and press flat.

Technique Tip: Understitching ensures the facing never rolls outward into view.
4

Sew Side Seams and Side Vents

Pin side seams from underarm down to side vent notch. Stitch at 1.5 cm (5/8"). Backstitch securely at vent notch. Press side seam and vent extensions open.

Technique Tip: Miter the corners of the side vents for a bespoke finish.
5

Hem Sleeves and Lower Body

Turn sleeve hems under 1 cm, then 1.5 cm; press and edgestitch. Turn lower hem under 1.5 cm, then 1.5 cm; stitch continuous hem across vents and hemline.

Technique Tip: Press each seam over a wood clapper for crisp rectangular folds.

Problemen oplossen

Boatneck facing flips out when moving

Understitching was skipped or facing wasn't secured to shoulder allowances.

Tack the facing to the shoulder seam allowances with small hand stitches or machine stitch in the ditch.

Underarm curve pulls tight when raising arms

Underarm curve seam is too shallow for your reach.

Reinforce underarm with small stay-stitches, then clip underarm curve every 1 cm to release tension.

Bron en licentie

In-house digital draft specification created for Threadline Patterns. Released under Creative Commons Attribution 4.0 International (CC BY 4.0). Free for personal and commercial sewing.

CC BY 4.0

https://creativecommons.org/licenses/by/4.0/

Testinformatie

Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.

sample-pending · verified

Threadline Technical Team · Astrid Lindholm

Engelse bronpaginaContact

Gerelateerde patronen