Naar de inhoud
Threadline Patterns
Nederlands

Hugo hoodie met buidelzak – Naaipatronen

Hugo hoodie met buidelzak: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
XS – 3XL
Niveau
Gevorderde beginner
Versie
1.1.0-review
Bijgewerkt
2026-09-11
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

1. Lichaamsmaten

Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.

Veeg door de maten
Maat Borst Taille Heup
XS 80 cm 62 cm 88 cm
S 86 cm 68 cm 94 cm
M 92 cm 74 cm 100 cm
L 98 cm 80 cm 106 cm
XL 108 cm 90 cm 116 cm
2XL 118 cm 100 cm 126 cm
3XL 128 cm 110 cm 136 cm

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Afgewerkte borstomtrek Afgewerkte lengte Zoomwijdte Bovenarmomtrek
XS 98 cm 72 cm 102 cm 34 cm
S 104 cm 74 cm 108 cm 35.5 cm
M 110 cm 76 cm 114 cm 37 cm
L 116 cm 78 cm 120 cm 39 cm
XL 126 cm 80 cm 130 cm 42 cm
2XL 136 cm 82 cm 140 cm 45 cm
3XL 146 cm 84 cm 150 cm 48 cm

Maatkeuze en pasvorm

Select by chest measurement. Hugo is drafted for relaxed layering; compare the finished chest and length before cutting.

Toelichting op bewegingsruimte

+18 cm positive ease at the chest in this fixed-size review adaptation.

Stof en benodigdheden

French terry, sweatshirt fleece, or heavy cotton jersey · 20-40% Stretch

  • French terry, sweatshirt fleece, or heavy cotton jersey
  • Rib knit for cuffs and hem band
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
XS – M2.22.41.81.95
L – XL2.62.852.12.3
2XL – 3XL33.32.52.75

Notions

  • Matching all-purpose polyester or cotton sewing thread
  • Universal sewing needle (size 80/12)
  • Ballpoint or jersey needle (size 80/12)
  • Cotton drawcord (1.2 m)
  • Herringbone twill tape for neck seam

Tools

  • Sewing machine
  • Fabric shears
  • Pins or fabric clips
  • Steam iron and ironing board

Knipplan en patroondelen

10 mm (3/8 in) included on all seams.

10 mm (3/8 in) seam allowance included for attaching the rib waistband.

10 mm (3/8 in) included at hood, neck-binding and raglan seams.

  • Hoodie Front Body: Cut 1 on Fold Kangaroo pocket placement
  • Hoodie Back Body: Cut 1 on Fold Raglan back
  • Raglan Sleeves: Cut 1 Pair Raglan armhole seams
  • Crossover Hood Panels: Cut 2 Outer Pairs, Cut 2 Lining Pairs Crossover front
  • Hood Centre Panels: Cut 1 Outer, Cut 1 Lining Join between hood side panels
  • Neck Binding: Cut 1 in Rib Knit Stabilises the neckline seam
  • Kangaroo Pocket: Cut 1 on Fold Hand openings
  • Pocket Facings: Cut 2 Mirrored Finish the pocket hand openings
  • Rib Wrist Cuffs: Cut 1 Pair in Rib Knit 10mm stretch seams
  • Rib Hem Waistband: Cut 1 on Fold in Rib Knit 10mm stretch seams

Press fabric before cutting to remove packing folds and pre-shrink fibers.

Align piece grainlines strictly parallel to fabric selvages.

Transfer notch markings with small 3 mm snips into the seam allowance margin.

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

Naai-instructies

1

Reinforce the Kangaroo Pocket Openings

Stabilize the marked ends of both diagonal hand openings, turn the opening allowances to the wrong side, and topstitch them. Press the remaining Kangaroo Pocket edges under, align its center fold and placement marks with the Hoodie Front Body, then topstitch the sides and lower edge with reinforced stitching at all four opening ends.

2

Attach Raglan Sleeves

Match each Raglan Sleeve to the front body at the single-notch seam and to the back body at the double-notch seam, right sides together. Stitch all four raglan seams with a stretch-compatible stitch, finish the allowances together, and press them toward the sleeves.

3

Close Underarm and Body Seams

Fold the hoodie right sides together and match the raglan seam intersections. Stitch continuously from each sleeve wrist through the underarm and down the body side seam. Finish the allowances together and press them toward the back.

4

Assemble the Lined Crossover Hood

Stitch the shell hood center-back seam and repeat for the lining. Place shell and lining right sides together, stitch the face opening, turn and press, then topstitch the marked drawcord casing. Work the drawcord through the casing before attaching the hood.

5

Attach Hood to Neckline

Overlap the crossover hood fronts at the center-front notch and baste the overlap. Match the hood center back to the body center back, pin the hood to the neckline right sides together, stitch, and cover the finished seam allowance with herringbone twill tape.

6

Attach Rib Cuffs and Hem Band

Join the Rib Wrist Cuffs and Rib Hem Waistband into separate loops, then fold each loop lengthwise wrong sides together. Quarter-mark every band and opening; stretch the rib evenly while attaching the cuffs and waistband with a stretch-compatible stitch.

Problemen oplossen

Seams puckering along stitch line

Thread tension too high or needle blunt

Insert fresh needle and test balance on fabric scrap.

Wavy edge along curved perimeter

Edge was stretched while feeding into machine

Staystitch immediately after cutting and use walking foot.

Bron en licentie

Adapted from FreeSewing Hugo documentation and source, distributed under the upstream MIT license. Original design by Joost De Cock and the FreeSewing community.

MIT / CC BY 4.0 Joost De Cock & FreeSewing Community

https://freesewing.eu/docs/designs/hugo/

Testinformatie

Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.

community-tested · verified

Joost De Cock & FreeSewing Community · Threadline review pending

Engelse bronpaginaContact

Gerelateerde patronen