1
Stabilise the Button Fronts
Fuse small interfacing patches to the wrong side at both marked button positions. Finish the front edges, turn them along the printed fold lines, press, and topstitch without stretching.
Yuri capuchontrui met knopen – Naaipatronen
Yuri capuchontrui met knopen: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.
- Maten
- XS – 3XL
- Niveau
- Gemiddeld
- Versie
- 1.1.0-review
- Bijgewerkt
- 2026-09-11
- Patroonstatus
- Gepubliceerd
Technische tekeningen
PDF-bestanden downloaden
Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.
Downloaden: Instructies (PDF · 16.1 KB)Downloaden: A4 (PDF · 257.8 KB)Downloaden: US Letter (PDF · 258.8 KB)
Download het printertestbladMaattabellen
Maateenheid
Wissel tussen centimeters en inches in alle tabellen
1. Lichaamsmaten
Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.
Veeg door de maten
2. Afgewerkte kledingmaten
Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.
Veeg door de maten
Maatkeuze en pasvorm
Select by chest measurement. Yuri is intentionally roomy; use the listed finished measurements before changing size.
Toelichting op bewegingsruimte
+18 cm positive ease at the chest in this fixed-size review adaptation.
Stof en benodigdheden
French terry, sweatshirt fleece, or heavy cotton jersey · 20-40% Stretch
- French terry, sweatshirt fleece, or heavy cotton jersey
- A stable knit or light woven for optional hood lining
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 2.3 | 2.5 | 1.9 | 2.1 |
| L – XL | 2.7 | 2.95 | 2.2 | 2.4 |
| 2XL – 3XL | 3.1 | 3.4 | 2.6 | 2.85 |
Notions
- Matching all-purpose polyester or cotton sewing thread
- Universal sewing needle (size 80/12)
- Ballpoint or jersey needle (size 80/12)
- Two large buttons (approximately 30 to 40 mm)
- Lightweight fusible interfacing for button areas
Tools
- Sewing machine
- Fabric shears
- Pins or fabric clips
- Steam iron and ironing board
Knipplan en patroondelen
10 mm (3/8 in) included on all seams.
25 mm (1 in) turn-up hem included.
10 mm (3/8 in) included at hood and arm seams.
- Yuri Front: Cut 2 mirrored Overlapping button-front edges
- Yuri Back: Cut 1 on Fold Centre back on fold
- Yuri Sleeves: Cut 1 Pair Match to front, back and gusset
- Underarm Gussets: Cut 2 on Fold Diamond gussets
- Hood Sides: Cut 4 Two outer and two lining
- Hood Centres: Cut 2 One outer and one lining
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
Naai-instructies
2
Join Shoulders and Set Sleeves
Join each front to the back at the shoulder seams. Match sleeve front and back notches, stitch the sleeves to the open armholes, finish the allowances together, and press toward the sleeves.
3
Insert the Underarm Gussets
Open each folded gusset and match its four marked points to front, sleeve-front, sleeve-back and back. Stitch one edge at a time, pivoting accurately at the points without sewing across the corner.
4
Close Side and Sleeve Seams
With right sides together, stitch from each wrist to the gusset and from the gusset to the body hem. Keep gusset points aligned, finish the allowances, and press toward the back.
5
Assemble the Lined Hood
Join the outer hood sides to the outer hood centre and repeat for the lining. Sew outer and lining right sides together around the face opening, turn, press, and understitch where accessible.
6
Attach Hood and Finish Hems
Match the hood centre to centre back and the hood ends to the front neckline marks. Stitch the hood to the neckline, finish the allowance, then turn and stitch the sleeve and body hems at the printed fold lines.
7
Sew Buttons and Final Check
Make two secure buttonholes on the overlapping front and sew the two large buttons at the matching marks. Check that the overlap lies flat and reinforce any stress points before the final press.
Problemen oplossen
Seams puckering along stitch line
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Wavy edge along curved perimeter
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
Bron en licentie
Adapted from FreeSewing Yuri documentation and source, distributed under the upstream MIT license. Original design by Joost De Cock and the FreeSewing community.
MIT / CC BY 4.0 Joost De Cock & FreeSewing Community
https://freesewing.eu/docs/designs/yuri/Testinformatie
Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.
community-tested · verified
Joost De Cock & FreeSewing Community · Threadline review pending
Gerelateerde patronen
Sweatshirts en hoodies · Beginner
Sven raglansweatshirt
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesSweatshirts en hoodies · Gevorderde beginner
Hugo hoodie met buidelzak
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesSweatshirts en hoodies · Gevorderde beginner
Klassiek sweatshirt met ronde hals
Maten: XS to 3XL (Bust 80–132 cm / 31.5"–52.0") · Gepubliceerd
Bekijk patroon en instructies