Los T-shirt met vleermuismouwen: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.
Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.
Wissel tussen centimeters en inches in alle tabellen
Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.
Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.
Select size based on full bust/chest measurement.
+4 to +8 cm positive wearing ease for comfortable drape.
Lightweight to medium-weight suitable fabric substrates · 20-40% Stretch
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.5 | 1.65 | 1.3 | 1.4 |
| L – XL | 1.8 | 1.95 | 1.5 | 1.65 |
| 2XL – 3XL | 2.1 | 2.3 | 1.8 | 1.95 |
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
Transfer the grown-on dolman extension guides to the Front Body and Back Body. Place the bodies right sides together, match the neckline, shoulder, and extension marks, stitch both shoulder seams with a stretch-compatible stitch, and press the allowances toward the back.
Join the Neckband short ends right sides together to form a loop, then fold it lengthwise wrong sides together. Quarter-mark the band and neckline and attach the band with even stretch, keeping the soft neckline curve flat.
Open the body flat and place each Sleeve against its extended shoulder and armhole edge right sides together. Match the center cap notch to the dolman extension mark, distribute the sleeve cap evenly, and stitch with a stretch-compatible stitch.
Fold the top right sides together and match the sleeve seams, underarm points, and body hem. Stitch continuously from each sleeve hem around the dolman underarm transition and down the relaxed side seam. Finish together and press toward the back.
Let the slouchy top hang before checking the final body length. Press the sleeve and body hem allowances to the wrong side and stitch with a twin needle, coverstitch, or narrow zig-zag while keeping the grown-on extensions free of ripples.
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
Threadline Open Design Studio (dolman-sleeve-slouchy-tee). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.
CC BY-SA 4.0 Threadline Technical Team
https://threadlinepatterns.orgPrepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Community Open Source Verification
Tops en hemdjes · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesTops en hemdjes · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesTops en hemdjes · Gemiddeld
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructies