1
Attach Raglan Sleeves
Pin sleeve diagonal raglan edges to front body diagonal seams right sides together, then to back body diagonal seams. Serge or stretch-stitch seams and press towards sleeves.
Sven ラグランスウェット – 型紙一覧
Sven ラグランスウェットの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS – 3XL
- 難易度
- 初心者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-09
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Select size based on chest measurement. For an oversized streetwear fit, choose one size up.
ゆとりについて
+14 to +20 cm positive ease over body chest for comfortable layering over tees.
生地と用具
French terry, sweatshirt fleece, or heavy cotton jersey · 20-40% Stretch
- French terry, sweatshirt fleece, or heavy cotton jersey
- Rib knit for cuffs and hem band
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.6 | 1.75 | 1.3 | 1.4 |
| L – XL | 1.9 | 2.1 | 1.5 | 1.65 |
| 2XL – 3XL | 2.2 | 2.4 | 1.8 | 1.95 |
Notions
- Matching all-purpose polyester or cotton sewing thread
- Universal sewing needle (size 80/12)
- Ballpoint or jersey needle (size 80/12)
- Cotton drawcord (1.2 m)
- Herringbone twill tape for neck seam
Tools
- Sewing machine
- Fabric shears
- Pins or fabric clips
- Steam iron and ironing board
裁断と型紙パーツ
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for rib neckband attachment.
- Sweatshirt Front: Cut 1 on Fold Classic raglan crew neckline
- Sweatshirt Back: Cut 1 on Fold High raglan back neckline
- Raglan Sleeve: Cut 1 Pair Full-length diagonal raglan lines front and back
- Rib Hem Band: Cut 1 in Rib Knit Fold lengthwise wrong sides together with 20% negative ease
- Rib Neckband: Cut 1 in Rib Knit Fold lengthwise wrong sides together and stretch to fit crew opening
- Rib Wrist Cuffs: Cut 2 in Rib Knit Cut crosswise with vertical ribs
Press fleece or French terry knit before cutting.
Align piece grainlines strictly parallel to fabric selvages.
Cut rib knit pieces with maximum crosswise stretch.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
縫製手順
2
Stitch Continuous Side & Underarm Seams
Pin front to back right sides together, carefully matching underarm seam intersections. Stitch continuous underarm sleeve seam and side seam in one pass from wrist to bottom hem.
3
Construct & Attach Rib Neckband
Stitch short ends of rib neckband right sides together into a circle. Fold in half lengthwise wrong sides together. Quarter-mark band and neckline opening. Pin and stretch neckband evenly to stitch in the round.
4
Attach Rib Wrist Cuffs
Stitch short ends of each wrist cuff strip into a loop. Fold in half lengthwise wrong sides together. Pin to sleeve hem matching quarter points, stretch rib evenly, and serge in the round.
5
Construct & Attach Rib Hem Band
Stitch short ends of bottom rib hem band into a continuous loop. Fold in half lengthwise wrong sides together. Quarter-mark band and sweatshirt hem opening; stretch band evenly and serge into place.
6
Final Steam Press
Give all serged seams, neckband, cuffs, and hem band a thorough steam press with a pressing cloth to set the rib recovery.
困ったときは
Seams puckering along stitch line
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Wavy edge along curved perimeter
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
出典とライセンス
FreeSewing (sven-raglan-sweatshirt). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.
MIT / CC BY 4.0 Joost De Cock & FreeSewing Community
https://github.com/freesewing/freesewing検証について
Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.
community-tested · verified
Joost De Cock & FreeSewing Community · Community Open Source Verification