1
Raglan Seams
Stitch front raglan seams right sides together joining sleeves to front bodice. Stitch back raglan seams right sides together joining sleeves to back bodice. Press seam allowances toward sleeves.
クルーネックスウェット – 型紙一覧
クルーネックスウェットの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS to 3XL (Bust 80–132 cm / 31.5"–52.0")
- 難易度
- 初級者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-01
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Drafted with 20 cm (7.9") of positive ease for a relaxed collegiate athletic silhouette.
ゆとりについて
Comfortable athletic ease of +20 cm (+7.9") across the chest, anchored by snug rib trims at wrists and waist.
生地と用具
Medium to heavy knit sweatshirting · Main fabric 20–30% stretch; Ribbing at least 50% stretch
- 100% Cotton French Terry (280–340 gsm) for cozy breathability
- Brushed fleece or polar fleece for cold-weather warmth
- Matching 2x2 heavy cotton rib knit for neckband, cuffs, and hem band
- Organic cotton loopback terry
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.8 | 2 | 1.5 | 1.6 |
| L – XL | 2.1 | 2.3 | 1.7 | 1.9 |
| 2XL – 3XL | 2.4 | 2.6 | 2 | 2.2 |
Notions
- Matching 2x2 rib knit (0.5 m / 0.6 yd)
- Stretch or ballpoint needle (size 90/14)
- All-purpose polyester thread
Tools
- Sewing machine with stretch stitch or 4-thread serger
- Steam iron and clapper
裁断と型紙パーツ
1.0 cm (3/8 in) included throughout for serger/overlocker.
Attached 6 cm folded rib band.
0.8 cm (5/16 in) for neckband.
- Front Bodice on Fold: Cut 1 on fold
- Back Bodice on Fold: Cut 1 on fold
- Raglan Sleeve: Cut 1 pair
- Neckband in Rib: Cut 1
- Wrist Cuffs in Rib: Cut 1 pair
- Bottom Hem Band in Rib: Cut 2
Cut rib pieces with ribs running vertically (greatest stretch horizontal).
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
縫製手順
2
Neckband Attachment
Join neckband short ends right sides together into a continuous loop. Fold in half lengthwise. Quarter neckband and neckline with pins. Stretch evenly and sew right sides together with serger or stretch stitch. Press seam allowances down.
3
Continuous Side and Underarm Seams
Align front and back bodices right sides together. Stitch from sleeve cuff opening all the way down through the side seam in one continuous serged line. Press seam allowances.
4
Attach Rib Cuffs & Hem Band
Join cuff and bottom hem band loops right sides together, fold lengthwise. Stretch evenly to fit sleeve and body openings right sides together, stitch, and press seam allowances.
困ったときは
Neckband stands up or gapes
Ribbing did not have enough recovery or was cut too long.
Ensure neckband length is approximately 80–85% of neckline opening.
出典とライセンス
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Astrid Lindholm