1
Hem Top Neck Edge
Press and stitch narrow double fold hem along the top edge of front and back bodice panels.
シャーリング入りペプラムブラウス – 型紙一覧
シャーリング入りペプラムブラウスの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS to 3XL (Bust 80–132 cm / 31.5"–52.0")
- 難易度
- 初級者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-01
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Because shirring expands up to 40%, the relaxed garment bust is smaller than body bust. It gently expands to contour your silhouette comfortably.
ゆとりについて
Form-fitting elastic expansion accommodates bust sizes from A through DD cup comfortably.
生地と用具
Lightweight wovens that take elastic gathers easily · Elastic thread shirring expansion
- Cotton voile or batiste for cloud-soft smocking
- Gingham cotton lawn or floral poplin
- Rayon challis for fluttery peplum movement
- Double gauze for relaxed bohemian drape
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.7 | 1.9 | 1.3 | 1.4 |
| L – XL | 2 | 2.2 | 1.5 | 1.6 |
| 2XL – 3XL | 2.3 | 2.5 | 1.8 | 2 |
Notions
- 1 spool elastic shirring thread (for bobbin)
- Standard sewing thread for needle
- Steam iron
Tools
- Sewing machine with adjustable bobbin tension
- Iron for steam shrinking
裁断と型紙パーツ
1.5 cm (5/8 in) seam allowance.
1.0 cm (3/8 in) narrow hem on peplum and flutter sleeves.
1.0 cm (3/8 in) turned-under hem.
- Bodice Rectangle to Shirr: Cut 2 (Front & Back)
- Peplum Flounce: Cut 2
- Flutter Sleeve: Cut 2 pairs
Cut bodice pieces flat before shirring.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
縫製手順
2
Shirr Bodice Panels
Wind elastic thread onto bobbin by hand. Stitch parallel rows 1 cm apart across the bodice. Hit with high steam iron to shrink into tight gathers.
3
Attach Flutter Sleeves
Hem curved edge of flutter sleeves. Attach to bodice shoulder points.
4
Side Seams & Peplum
Stitch side seams. Gather peplum flounce to match bottom of shirred bodice, attach right sides together, and hem.
困ったときは
Shirring is loose and does not gather
Bobbin was wound under machine tension instead of hand.
Wind elastic thread by hand onto bobbin with gentle, consistent tension.
出典とライセンス
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Threadline Pattern Studio