Hem Top Neck Edge
Press and stitch narrow double fold hem along the top edge of front and back bodice panels.
Gesmokte blouse met schootje: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.
Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.
Wissel tussen centimeters en inches in alle tabellen
Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.
Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.
Because shirring expands up to 40%, the relaxed garment bust is smaller than body bust. It gently expands to contour your silhouette comfortably.
Form-fitting elastic expansion accommodates bust sizes from A through DD cup comfortably.
Lightweight wovens that take elastic gathers easily · Elastic thread shirring expansion
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.7 | 1.9 | 1.3 | 1.4 |
| L – XL | 2 | 2.2 | 1.5 | 1.6 |
| 2XL – 3XL | 2.3 | 2.5 | 1.8 | 2 |
1.5 cm (5/8 in) seam allowance.
1.0 cm (3/8 in) narrow hem on peplum and flutter sleeves.
1.0 cm (3/8 in) turned-under hem.
Cut bodice pieces flat before shirring.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
Press and stitch narrow double fold hem along the top edge of front and back bodice panels.
Wind elastic thread onto bobbin by hand. Stitch parallel rows 1 cm apart across the bodice. Hit with high steam iron to shrink into tight gathers.
Hem curved edge of flutter sleeves. Attach to bodice shoulder points.
Stitch side seams. Gather peplum flounce to match bottom of shirred bodice, attach right sides together, and hem.
Bobbin was wound under machine tension instead of hand.
Wind elastic thread by hand onto bobbin with gentle, consistent tension.
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Threadline Pattern Studio
Overhemden en blouses · Gemiddeld
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesOverhemden en blouses · Gemiddeld
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesOverhemden en blouses · Beginner
Maten: XS to 3XL (Bust 80–132 cm / 31.5"–52.0") · Gepubliceerd
Bekijk patroon en instructies