ゴム入りネックラインのブラウスの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロードすべての表でセンチメートルとインチを切り替えます
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
デザイン上のゆとりを含めた、完成した衣服の寸法です。
Because this blouse gathers into an elastic neckline, sizing is very forgiving. Select your size primarily based on desired body volume and armhole circumference.
+28 cm (+11") ease gathered into elastic casing for a romantic peasant-blouse drape.
Lightweight woven fabrics with fluid gathering characteristics · None (0% stretch)
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.6 | 1.75 | 1.3 | 1.4 |
| L – XL | 2 | 2.2 | 1.5 | 1.65 |
| 2XL – 3XL | 2.4 | 2.6 | 1.8 | 2 |
1.5 cm (5/8") for raglan seams and side seams.
1.5 cm (5/8") double-turned hem.
2.0 cm (3/4") allocated for folded elastic channel.
Ensure raglan diagonal edges are handled gently to avoid stretching before assembly.
Pin pieces securely when cutting slippery rayon or silk substrates.
Print Page 1 at 100% scale without scaling. Check 50mm test calibration box with a ruler.
Tape adjoining sheets along registration guidelines.
With right sides together, pin front raglan sleeve seams to front bodice matching notches. Stitch at 1.5 cm (5/8"). Repeat for back raglan sleeve seams to back bodice. Finish allowances and press toward sleeves.
With right sides together, align side seams and underarm sleeve seams. Stitch from sleeve hem through underarm down to body hem at 1.5 cm (5/8"). Finish seam and press toward back.
Fold top raw neckline edge down 6 mm toward wrong side and press. Fold down another 12 mm to create casing. Edgestitch 1 mm from bottom folded edge, leaving a 3 cm opening at center back.
Using a safety pin, thread 6 mm elastic through the neckline channel. Try on blouse and adjust tension to your comfort. Overlap elastic ends by 1.5 cm, zigzag stitch securely, push into channel, and stitch opening closed.
Form 10 mm casing at sleeve hems for wrist elastic if desired, or finish as straight turned cuffs. Turn lower hem under 6 mm, then 9 mm, and stitch.
Elastic cut too short or shrank during pressing.
Never press directly on braided elastic. Increase elastic length by 3–4 cm for a softer, relaxed hold.
In-house digital draft specification created for Threadline Patterns. Released under Creative Commons Attribution 4.0 International (CC BY 4.0). Free for personal and commercial sewing.
CC BY 4.0
https://creativecommons.org/licenses/by/4.0/
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Threadline Pattern Studio