1
Cutting Heavy Canvas
Cut main cover box panels from sturdy cotton canvas and lining panels from lightweight cotton. Press seam allowances.
収納付きミシンカバー – 型紙一覧
収納付きミシンカバーの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- One Size (Universal)
- 難易度
- 初心者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-09
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Universal One Size craft pattern with seam allowances included.
ゆとりについて
Reinforced dimensional structure designed for daily carry utility.
生地と用具
10 to 12 oz Cotton canvas, denim, or duck cloth · None (0% stable woven)
- 10 to 12 oz Cotton canvas, denim, or duck cloth
- Quilting cotton lining
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| One Size | 1.2 | 1.3 | 1 | 1.1 |
Notions
- Matching all-purpose polyester or cotton sewing thread
- Universal sewing needle (size 80/12)
- Heavy-duty thread
- Firm fusible craft interfacing
Tools
- Sewing machine
- Fabric shears
- Pins or fabric clips
- Steam iron and ironing board
裁断と型紙パーツ
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
- Caddy Outer Cover: Cut 2 in Sturdy Canvas Outer cover
- Caddy Lining: Cut 2 in Cotton Lining Interior lining
- Side Tool Pockets: Cut 2 in Canvas Divided accessory pockets
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
縫製手順
2
Notion Pockets
Stitch notion and scissor pockets to front cover exterior panel, dividing into slots with vertical topstitching. Press seam allowances.
3
Box Corner Assembly
Sew box corner seams on exterior canvas to create 3-dimensional rectangular dust cover shape. Press seam allowances.
4
Lining Construction
Repeat box corner assembly for lining cover, leaving 10 cm turning opening on one bottom side. Press seam allowances.
5
Enclose and Finish
Nest exterior into lining right sides facing, stitch bottom perimeter, turn right side out, and edgestitch bottom edge. Press seam allowances.
困ったときは
Seams puckering along stitch line
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Wavy edge along curved perimeter
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
出典とライセンス
Threadline Open Design Studio (sewing-machine-cover-caddy). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.
CC BY-SA 4.0 Threadline Technical Team
https://threadlinepatterns.org検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Community Open Source Verification