モダールのスクープネックTシャツの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロードすべての表でセンチメートルとインチを切り替えます
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
デザイン上のゆとりを含めた、完成した衣服の寸法です。
Select size based on full bust/chest measurement.
+4 to +8 cm positive wearing ease for comfortable drape.
Lightweight to medium-weight suitable fabric substrates · 20-40% Stretch
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.3 | 1.4 | 1.1 | 1.2 |
| L – XL | 1.5 | 1.65 | 1.3 | 1.4 |
| 2XL – 3XL | 1.8 | 1.95 | 1.5 | 1.65 |
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
Handle the deep scoop neckline gently so it does not grow before the neckband is attached. Place the Front Body and Back Body right sides together, stitch both shoulder seams with a stretch-compatible stitch, finish the allowances together, and press them toward the back.
Join the Neckband short ends into a loop and fold it lengthwise wrong sides together. Quarter-mark the band and deep scoop neckline, then add extra balance marks around the lower front curve. Stitch while stretching only the band so the neckline returns flat without gaping.
With the body open flat, match each Sleeve center cap notch to the shoulder seam and match the front and back notches. Support the soft modal fabric while stitching the sleeve cap into the armhole so the seam does not stretch.
Fold the tee right sides together, match the underarm seam intersections, and pin along the sleeve and body edges. Stitch continuously from each sleeve hem to the body hem, finish the allowances together, and press toward the back using low heat.
Let the tee rest flat, then press the sleeve and body hem allowances to the wrong side and stitch with a twin needle, coverstitch, or narrow zig-zag. Steam lightly and confirm that the deep scoop neckline lies smooth and level.
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
Threadline Open Design Studio (scoop-neck-modal-tee). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.
CC BY-SA 4.0 Threadline Technical Team
https://threadlinepatterns.orgPrepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Community Open Source Verification