1
Construct Henley Placket
Slash front neck slit on front bodice. Stitch right and left placket strips right sides together, fold over, and box-topstitch at bottom tab. Press seam allowances.
リブ編みのヘンリーネックトップス – 型紙一覧
リブ編みのヘンリーネックトップスの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS to 3XL (Bust 80–132 cm / 31.5"–52.0")
- 難易度
- 中級者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-01
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Designed with zero ease at bust. Select exact body measurement size for a neat fit.
ゆとりについて
Zero bust ease designed to contour your torso naturally with ribbed elasticity.
生地と用具
Ribbed or waffle knit fabrics · 40% horizontal stretch with good recovery
- Thermal waffle knit (200–260 gsm) for authentic heritage texture
- Cotton-spandex 2x2 rib knit for curve-hugging comfort
- Bamboo rib jersey for ultra-soft breathable feel
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.7 | 1.9 | 1.3 | 1.4 |
| L – XL | 2 | 2.2 | 1.5 | 1.6 |
| 2XL – 3XL | 2.3 | 2.5 | 1.8 | 2 |
Notions
- 3 buttons (12 mm)
- Fusible knit interfacing for placket (0.2 m)
- Stretch needle (size 80/12)
Tools
- Sewing machine with buttonhole capability
- Fine pins
- Iron
裁断と型紙パーツ
1.0 cm (3/8 in) throughout.
2.0 cm (3/4 in) hem allowance.
0.8 cm (5/16 in) for binding.
- Front Bodice with Placket Slit: Cut 1 on fold
- Back Bodice on Fold: Cut 1 on fold
- Long Sleeve: Cut 1 pair
- Henley Placket Strips: Cut 2 (interfaced)
- Neck Binding: Cut 1
Interface placket strips with lightweight knit interfacing.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
縫製手順
2
Shoulder Seams & Neck Binding
Align front bodice and Back Bodice on Fold right sides together. Stitch shoulder seams and press seam allowances. Apply narrow knit binding along neckline right sides together up to placket edges and topstitch.
3
Insert Sleeves and Side Seams
Insert long sleeves flat into armholes right sides together. Stitch side seams right sides together down to hem, and press seam allowances.
4
Buttonholes and Hemming
Sew vertical buttonholes on top placket and attach buttons. Turn under sleeve and bottom hems, press seam allowances, and stitch with twin needle.
困ったときは
Placket base puckers
Slit wasn't cut cleanly to corner notches.
Clip diagonal notches precisely to stitch corners at base of placket.
出典とライセンス
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Astrid Lindholm