1
Cut Twill Pieces & Interface
Cut double-breasted jacket front panels, back panels, two-piece sleeves, mandarin collar, and pockets from durable cotton twill. Interface front crossover facings and collar.
スタンドカラーのシェフジャケット – 型紙一覧
スタンドカラーのシェフジャケットの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS – 3XL
- 難易度
- 中級者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-09
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Select size based on chest measurement, accounting for mid-layer garments.
ゆとりについて
+16 to +22 cm chest ease for layering over sweaters and hoodies.
生地と用具
Cotton twill, chef coat drill, or poly-cotton canvas (200–260 gsm) · None (0% stable woven)
- 100% cotton drill or twill (220–240 gsm)
- Poly-cotton 65/35 workwear twill
- Heavyweight cotton duck
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 2.3 | 2.5 | 1.8 | 1.95 |
| L – XL | 2.7 | 2.95 | 2.2 | 2.4 |
| 2XL – 3XL | 3.1 | 3.4 | 2.6 | 2.85 |
Notions
- Matching heavy-duty thread
- Jeans/twill needle (size 90/14)
- 10 chef coat knotted cloth buttons or buttonhole studs
- Fusible medium-weight interfacing for mandarin collar and front overlap
Tools
- Sewing machine
- Fabric shears
- Pins or fabric clips
- Steam iron and ironing board
裁断と型紙パーツ
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
- Jacket Front: Cut 1 Pair in Twill Double-breasted front
- Jacket Back: Cut 1 Pair in Twill Center back vent
- Upper Sleeve: Cut 1 Pair in Twill Articulated upper sleeve
- Under Sleeve: Cut 1 Pair in Twill Articulated under sleeve
- Mandarin Stand Collar: Cut 2 in Twill (1 Interfaced) Mandarin collar
- Lower Patch Pockets: Cut 2 in Twill Reinforced pockets
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
縫製手順
2
Prepare Patch Pockets
Double-turn and topstitch top pocket hem. Topstitch pocket onto left chest or sleeve with reinforced bartacks at upper corners.
3
Body & Shoulder Seams
Stitch center back seam with flat-felled finish. Join front and back body panels at shoulder seams right sides together and press open.
4
Attach Mandarin Stand Collar
Stitch outer and inner mandarin collar pieces along curved top edge right sides together, clip curves, turn right side out, and press. Stitch outer collar to neckline, turn inner collar under, and edgestitch across neck seam.
5
Two-Piece Sleeves and Side Seams
Assemble two-piece sleeves, set into armholes easing sleeve cap fullness, and stitch side seams continuously from sleeve wrist to jacket hem.
6
Button Band Facing, Chef Buttons & Hems
Press front crossover facings inside and stitch. Sew double-breasted rows of chef knot buttons or buttonhole studs. Hem sleeves with folded turn-back sleeve hems and hem jacket lower edge.
困ったときは
Seams puckering along stitch line
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Wavy edge along curved perimeter
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
出典とライセンス
Threadline Open Design Studio (mandarin-chef-jacket). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.
CC BY-SA 4.0 Threadline Technical Team
https://threadlinepatterns.org検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Community Open Source Verification