1
Prepare Deep Patch Pockets
Press top hem of pockets under and twin-needle topstitch. Position pockets onto front body markings, pin securely, and edgestitch in place.
コクーンカーディガン – 型紙一覧
コクーンカーディガンの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS – 3XL
- 難易度
- 初心者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-09
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Select size based on chest measurement. For an oversized streetwear fit, choose one size up.
ゆとりについて
+18 to +26 cm bust ease for dramatic, cocoon slouchy drape.
生地と用具
Medium-weight drapey knit: French terry, waffle knit, or sweater knit (220–300 gsm) · 25–40% crosswise stretch with good recovery
- French terry with modal or spandex
- Waffle texture knit
- Brushed sweater knit
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 2.4 | 2.6 | 1.9 | 2.1 |
| L – XL | 2.8 | 3.05 | 2.3 | 2.5 |
| 2XL – 3XL | 3.2 | 3.5 | 2.7 | 2.95 |
Notions
- Matching polyester stretch thread
- Ballpoint needle (size 80/12)
- Clear elastic for shoulder stabilization (25 cm)
Tools
- Sewing machine
- Fabric shears
- Pins or fabric clips
- Steam iron and ironing board
裁断と型紙パーツ
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
- Cocoon Front Body: Cut 1 Pair in Knit Fabric Curved cocoon silhouette front
- Cocoon Back Body: Cut 1 on Fold in Knit Fabric Curved center back fold
- Dolman Sleeves / Extensions: Cut 1 Pair in Knit Fabric Extended sleeve segments
- Continuous Collar Band: Cut 2 (joined at Center Back) Long continuous front and neck band
- Deep Patch Pockets: Cut 1 Pair in Self Knit Spacious slouchy hip pockets
- Sleeve Cuff Bands: Cut 1 Pair in Ribbing or Self Fitted wrist cuffs to anchor volume
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
縫製手順
2
Shoulder and Sleeve Seams
Reinforce shoulder seams with clear elastic. Stitch front and back bodice right sides together at the shoulders. Attach sleeve extension pieces to armscyes.
3
Cocoon Side & Underarm Seams
Align front and back along curved cocoon side seams and underarm sleeves. Stitch in a smooth continuous curve and press toward back.
4
Assemble Continuous Collar Band
Join collar band halves at center back seam. Fold band lengthwise wrong sides together and press. Pin band around entire front and neck perimeter, easing smoothly, and serge.
5
Attach Sleeve Cuffs & Hem
Form cuff bands into loops, fold wrong sides together, and serge to sleeve hems. Finish bottom curved hem of cardigan with a clean stretch topstitch.
困ったときは
Seams puckering along stitch line
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Wavy edge along curved perimeter
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
出典とライセンス
Threadline Open Design Studio (cocoon-cardigan). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.
CC BY-SA 4.0 Threadline Technical Team
https://threadlinepatterns.org検証について
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Community Open Source Verification