Naar de inhoud
Threadline Patterns
Nederlands

Wikkeltop met schootje – Naaipatronen

Wikkeltop met schootje: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
XS – 3XL
Niveau
Gevorderde beginner
Versie
1.0.0-published
Bijgewerkt
2026-03-09
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Downloaden: Instructies (PDF · 13.7 KB)Downloaden: A4 (PDF · 95.6 KB)Downloaden: US Letter (PDF · 96.4 KB)
Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

1. Lichaamsmaten

Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.

Veeg door de maten
Maat Borst Taille Heup
XS 80 cm 62 cm 88 cm
S 86 cm 68 cm 94 cm
M 92 cm 74 cm 100 cm
L 98 cm 80 cm 106 cm
XL 108 cm 90 cm 116 cm
2XL 118 cm 100 cm 126 cm
3XL 128 cm 110 cm 136 cm

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Afgewerkte borstomtrek Afgewerkte taille Afgewerkte lengte Zoomwijdte
XS 86 cm 68 cm 56 cm 124 cm
S 92 cm 74 cm 58 cm 130 cm
M 98 cm 80 cm 60 cm 136 cm
L 104 cm 86 cm 62 cm 142 cm
XL 114 cm 96 cm 64 cm 154 cm
2XL 124 cm 106 cm 66 cm 166 cm
3XL 134 cm 116 cm 68 cm 178 cm

Maatkeuze en pasvorm

Select size based on full bust/chest measurement.

Toelichting op bewegingsruimte

+4 to +8 cm positive wearing ease for comfortable drape.

Stof en benodigdheden

Lightweight to medium-weight suitable fabric substrates · None (0% stable woven)

  • Lightweight to medium-weight suitable fabric substrates
  • Pre-washed natural fibers (cotton, linen, or bamboo)
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
XS – M1.71.851.41.55
L – XL22.21.71.85
2XL – 3XL2.42.622.2

Notions

  • Matching all-purpose polyester or cotton sewing thread
  • Universal sewing needle (size 80/12)

Tools

  • Sewing machine
  • Fabric shears
  • Pins or fabric clips
  • Steam iron and ironing board

Knipplan en patroondelen

10 mm (3/8 in) included on all seams.

15 mm (5/8 in) double-fold hem.

6 mm (1/4 in) for neckband or binding attachment.

  • Specialty Front Bodice: Cut 1 Pair Surplice crossover wrap front
  • Back Bodice: Cut 1 on Fold Fitted back bodice
  • Sleeve: Cut 1 Pair Short set-in sleeves

Press fabric before cutting to remove packing folds and pre-shrink fibers.

Align piece grainlines strictly parallel to fabric selvages.

Transfer notch markings with small 3 mm snips into the seam allowance margin.

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

Naai-instructies

1

Cut Pieces

Cut surplice wrap front bodice panels, back bodice on fold, and set-in short sleeves.

2

Shoulders and Neckline

Join shoulder seams with right sides facing and finish wrap neckline edges with narrow double-fold hem.

3

Overlap Front Panels

Overlap front bodice panels at waistline matching center marks and baste across bottom edge.

4

Insert Sleeves

Insert sleeves into armholes and stitch side seams continuously from sleeve sleeve hems through waist.

5

Hemming and Pressing

Turn narrow double hem along bottom edge, hem sleeve sleeve hems, and give completed top a final steam press.

Problemen oplossen

Seams puckering along stitch line

Thread tension too high or needle blunt

Insert fresh needle and test balance on fabric scrap.

Wavy edge along curved perimeter

Edge was stretched while feeding into machine

Staystitch immediately after cutting and use walking foot.

Bron en licentie

Threadline Open Design Studio (wrap-front-peplum-top). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.

CC BY-SA 4.0 Threadline Technical Team

https://threadlinepatterns.org

Testinformatie

Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.

sample-pending · verified

Threadline Technical Team · Community Open Source Verification

Engelse bronpaginaContact

Gerelateerde patronen