Cut Ripstop Nylon
Cut Jacket Front panels, Jacket Back panels, Upper Sleeve, Under Sleeve, and Lower Patch Pockets from weather-resistant ripstop nylon.
Uniseks windjack met raglanmouwen: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.
Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.
Wissel tussen centimeters en inches in alle tabellen
Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.
Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.
Select size based on chest measurement, accounting for mid-layer garments.
+16 to +22 cm chest ease for layering over sweaters and hoodies.
Lightweight to medium-weight suitable fabric substrates · None (0% stable woven)
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.9 | 2.1 | 1.5 | 1.65 |
| L – XL | 2.3 | 2.5 | 1.8 | 1.95 |
| 2XL – 3XL | 2.7 | 2.95 | 2.2 | 2.4 |
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
Cut Jacket Front panels, Jacket Back panels, Upper Sleeve, Under Sleeve, and Lower Patch Pockets from weather-resistant ripstop nylon.
Hem Lower Patch Pockets top edges right sides together and topstitch onto jacket fronts with reinforced bar-tacks. Press seam allowances.
Join center back seam right sides together and attach raglan sleeve seams to front and back body panels right sides together. Press seam allowances.
Stitch underarm and side seams right sides together in one continuous pass. Press seam allowances.
Bind neckline edge with clean finish binding. Turn under sleeve hems and bottom hem casing, press seam allowances, and edgestitch neatly.
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
Threadline Open Design Studio (unisex-raglan-windbreaker). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.
CC BY-SA 4.0 Threadline Technical Team
https://threadlinepatterns.orgPrepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Community Open Source Verification
Jassen en werkkleding · Gemiddeld
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesJassen en werkkleding · Gemiddeld
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesJassen en werkkleding · Beginner
Maten: Universal (One Size) · Gepubliceerd
Bekijk patroon en instructies