Shoulder Seams
Stitch front and back bodices right sides together at shoulder seams. Press open.
Linnen top met striksluiting: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.
Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.
Wissel tussen centimeters en inches in alle tabellen
Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.
Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.
Choose size according to full bust. The adjustable tie allows customized waist fit. Pair with high-waisted linen trousers or skirts.
Positive ease of +10 cm (+3.9") at bust. Ties at the waist allow you to tighten or loosen as desired.
Lightweight to midweight linen and natural woven fibers · None (0% stretch - stable woven)
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.5 | 1.6 | 1.2 | 1.3 |
| L – XL | 1.8 | 2 | 1.4 | 1.5 |
| 2XL – 3XL | 2.1 | 2.3 | 1.7 | 1.9 |
1.5 cm (5/8 in) included throughout.
1.0 cm (3/8 in) narrow turn on tie extensions.
1.0 cm (3/8 in) on neckline facings.
Lay patterns parallel to grainline.
Interface neckline facings.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered marks. Tape sheets together.
Stitch front and back bodices right sides together at shoulder seams. Press open.
Sew facings right sides together, stitch to neckline, clip curves, understitch and press.
Stitch side seams down to top of tie extension. Press open.
Turn under and stitch narrow hem along ties and back hem. Hem sleeve openings.
Seam allowance bulky.
Clip corners at tie apex before pressing.
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Astrid Lindholm
Tops en hemdjes · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesTops en hemdjes · Beginner
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesTops en hemdjes · Gemiddeld
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructies