Cutting Robe Panels
Cut front robe body panels, back panels, dropped kimono sleeves, and continuous front neckband.
Losse kimono-ochtendjas: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.
Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.
Wissel tussen centimeters en inches in alle tabellen
Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.
Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.
Select size based on chest measurement, accounting for mid-layer garments.
+16 to +22 cm chest ease for layering over sweaters and hoodies.
Lightweight to medium-weight suitable fabric substrates · None (0% stable woven)
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 3.4 | 3.7 | 2.8 | 3.05 |
| L – XL | 3.9 | 4.25 | 3.2 | 3.5 |
| 2XL – 3XL | 4.5 | 4.9 | 3.7 | 4.05 |
10 mm (3/8 in) included on all seams.
15 mm (5/8 in) double-fold hem.
6 mm (1/4 in) for neckband or binding attachment.
Press fabric before cutting to remove packing folds and pre-shrink fibers.
Align piece grainlines strictly parallel to fabric selvages.
Transfer notch markings with small 3 mm snips into the seam allowance margin.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
Cut front robe body panels, back panels, dropped kimono sleeves, and continuous front neckband.
Sew center back seam and press open with iron.
Align pieces right sides together and stitch shoulder seams connecting front and back panels. Attach wide sleeves to robe armholes.
Align pieces right sides together and stitch underarm and side seams in a single continuous pass.
Fold neckband lengthwise, attach to front opening from hem around back neck to opposite hem, and hem sleeves and bottom robe.
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
Threadline Open Design Studio (relaxed-kimono-robe). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.
CC BY-SA 4.0 Threadline Technical Team
https://threadlinepatterns.orgPrepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Community Open Source Verification
Jassen en werkkleding · Gemiddeld
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesJassen en werkkleding · Gemiddeld
Maten: XS – 3XL · Gepubliceerd
Bekijk patroon en instructiesJassen en werkkleding · Beginner
Maten: Universal (One Size) · Gepubliceerd
Bekijk patroon en instructies