Naar de inhoud
Threadline Patterns
Nederlands

Tricot trui met boothals – Naaipatronen

Tricot trui met boothals: bekijk maten, technische tekeningen, broninformatie en beschikbare PDF-bestanden. Technische instructies en bestaande PDF’s zijn in het Engels.

Maten
XS – 3XL
Niveau
Beginner
Versie
1.0.0-published
Bijgewerkt
2026-03-09
Patroonstatus
Gepubliceerd

Technische tekeningen

Voorkant
Achterkant

PDF-bestanden downloaden

Print op 100% of werkelijke grootte, zonder aanpassen aan de pagina. Meet het controlevak op de gekozen testpagina: 50 mm of 2 inch (50,8 mm). Dit zijn verschillende lengtes. Maak eerst een proefmodel voordat je je definitieve stof knipt.

Downloaden: Instructies (PDF · 14.9 KB)Downloaden: A4 (PDF · 155.5 KB)Downloaden: US Letter (PDF · 155.6 KB)
Download het printertestblad

Maattabellen

Maateenheid

Wissel tussen centimeters en inches in alle tabellen

1. Lichaamsmaten

Je eigen lichaamsmaten. Meet over onderkleding met een aansluitend meetlint.

Veeg door de maten
Maat Borst Taille Heup
XS 80 cm 62 cm 88 cm
S 86 cm 68 cm 94 cm
M 92 cm 74 cm 100 cm
L 98 cm 80 cm 106 cm
XL 108 cm 90 cm 116 cm
2XL 118 cm 100 cm 126 cm
3XL 128 cm 110 cm 136 cm

2. Afgewerkte kledingmaten

Maten van het genaaide kledingstuk, inclusief de bedoelde bewegingsruimte.

Veeg door de maten
Maat Afgewerkte borstomtrek Afgewerkte lengte Zoomwijdte Bovenarmomtrek
XS 94 cm 60 cm 92 cm 30 cm
S 100 cm 62 cm 98 cm 31.5 cm
M 106 cm 64 cm 104 cm 33 cm
L 112 cm 66 cm 110 cm 35 cm
XL 122 cm 68 cm 120 cm 38 cm
2XL 132 cm 70 cm 130 cm 41 cm
3XL 142 cm 72 cm 140 cm 44 cm

Maatkeuze en pasvorm

Select size based on chest measurement. For an oversized streetwear fit, choose one size up.

Toelichting op bewegingsruimte

+10 to +16 cm chest ease for relaxed drop-shoulder sweater comfort.

Stof en benodigdheden

Medium to heavyweight knit: French terry, cotton sweater knit, or ponte (220–300 gsm) · 25–40% crosswise stretch with good recovery

  • Cotton sweater knit
  • French terry with 30% stretch
  • Waffle knit or ponte di Roma
Fabric requirements
Size45 in / m45 in / yd60 in / m60 in / yd
XS – M1.61.751.31.4
L – XL1.92.11.51.65
2XL – 3XL2.22.41.81.95

Notions

  • Matching polyester stretch thread
  • Ballpoint machine needle (size 80/12)
  • Matching rib knit fabric for hem and cuff bands (or self-fabric)

Tools

  • Sewing machine
  • Fabric shears
  • Pins or fabric clips
  • Steam iron and ironing board

Knipplan en patroondelen

10 mm (3/8 in) included on all seams.

15 mm (5/8 in) double-fold hem.

6 mm (1/4 in) for neckband or binding attachment.

  • Sweater Front Bodice: Cut 1 on Fold in Knit Fabric Cut on center front fold
  • Sweater Back Bodice: Cut 1 on Fold in Knit Fabric Cut on center back fold
  • Long Sleeves: Cut 1 Pair Tapered knit sleeves
  • Boatneck Facing / Band: Cut 1 in Self or Ribbing Clean-finish boatneck neckline
  • Rib Hem Band: Cut 1 in Ribbing or Self Folded bottom hem band
  • Rib Wrist Cuffs: Cut 1 Pair in Ribbing or Self Folded wrist cuffs

Press fabric before cutting to remove packing folds and pre-shrink fibers.

Align piece grainlines strictly parallel to fabric selvages.

Transfer notch markings with small 3 mm snips into the seam allowance margin.

Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.

Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.

Naai-instructies

1

Shoulder Seams

Stabilize shoulder seams with knit stay tape. Align front and back sweater bodice right sides together at the shoulders and stitch with a stretch stitch or 4-thread serger.

2

Finish Boatneck Neckline

Fold boatneck band lengthwise wrong sides together. Quarter-mark band and wide neckline. Serge band to neckline edge, stretching slightly to lie completely flat against collarbone.

3

Insert Sleeves Flat

Pin sleeve caps to bodice armholes right sides together, aligning center sleeve notch to shoulder seam. Stitch across each armhole.

4

Side and Underarm Seams

Pin front and back right sides together, aligning underarm seam intersections. Stitch side seams and sleeve inseams in one continuous run from cuff to hem.

5

Attach Wrist Cuffs & Hem Band

Fold cuff and hem band pieces into loops, press in half lengthwise, and serge onto sleeve openings and sweater bottom hem with even stretching.

Problemen oplossen

Seams puckering along stitch line

Thread tension too high or needle blunt

Insert fresh needle and test balance on fabric scrap.

Wavy edge along curved perimeter

Edge was stretched while feeding into machine

Staystitch immediately after cutting and use walking foot.

Bron en licentie

Threadline Open Design Studio (boatneck-knit-sweater). Distributed under CC BY-SA 4.0. Designer: Threadline Technical Team.

CC BY-SA 4.0 Threadline Technical Team

https://threadlinepatterns.org

Testinformatie

Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.

sample-pending · verified

Threadline Technical Team · Community Open Source Verification

Engelse bronpaginaContact

Gerelateerde patronen