Shoulder Seams
Align front bodices and Back Bodice on Fold right sides together. Stitch shoulder seams with clear elastic reinforcement. Press seam allowances toward back.
バレエ風ラップトップスの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ(50.8 mm)の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロードすべての表でセンチメートルとインチを切り替えます
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
デザイン上のゆとりを含めた、完成した衣服の寸法です。
The wrap styling allows custom adjustment over the bust and waist. Select size based on full bust.
Adjustable wrap styling accommodates body contours smoothly with 0 to +4 cm ease.
Stretch knits with fluid recovery · 40% 4-way stretch with high recovery
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 1.9 | 2.1 | 1.5 | 1.6 |
| L – XL | 2.2 | 2.4 | 1.7 | 1.9 |
| 2XL – 3XL | 2.5 | 2.7 | 2 | 2.2 |
1.0 cm (3/8 in) included.
Attached wrap bands and 2.0 cm sleeve hem.
0.8 cm (5/16 in) for neckband.
Mark side seam tie pass-through opening on right side seam.
Print Page 1 at 100% scale without scaling. Check 50 mm (Metric) or 2.0 in [50.8 mm] (Imperial) test square with a hard ruler.
Align numbered letter and row marks. Butt edges together without overlapping untrimmed paper.
Align front bodices and Back Bodice on Fold right sides together. Stitch shoulder seams with clear elastic reinforcement. Press seam allowances toward back.
Apply neckband along continuous front wrap edge and back neckline. Turn and stitch with stretch stitch.
Insert 3/4 sleeves flat into armholes right sides together. Stitch left side seam continuously right sides together. On right side seam, leave 3 cm opening for tie pass-through. Press seam allowances.
Turn under 2 cm hem allowances on bottom edges and sleeves, press seam allowances, and stitch with twin needle.
Neckband wasn't tensioned enough across diagonal bust edge.
Stretch neckband 10% more firmly along the diagonal bust curve.
Drafted by Threadline Patterns. CC BY-SA 4.0 International.
CC BY-SA 4.0
Prepared from the listed source record through a technical drafting workflow. Check the measurements, print calibration and construction details carefully, and email feedback if anything appears incorrect.
sample-pending · verified
Threadline Technical Team · Threadline Pattern Studio