1
Hem Wrap Panel Edges
Turn under and stitch a narrow 10 mm double-fold hem along the outer vertical wrap edges and curved waist extensions of both leg panels.
Waralee ラップパンツ – 型紙一覧
Waralee ラップパンツの寸法表、前後の図、出典、利用できるPDFを確認できます。技術説明と既存PDFは英語です。
- サイズ
- XS – 3XL
- 難易度
- 初心者向け
- バージョン
- 1.0.0-published
- 更新日
- 2026-03-09
- 公開状況
- 公開済み
前後の製図
PDFファイルのダウンロード
「実際のサイズ」または100%で印刷し、用紙に合わせる設定を使わないでください。選んだテスト用紙の50 mmまたは2インチ（50.8 mm）の枠を測ります。この2つは異なる長さです。本番の生地を裁断する前に試作してください。
印刷確認用シートをダウンロード寸法表
寸法の単位
すべての表でセンチメートルとインチを切り替えます
1. 身体寸法表
身体そのものの寸法です。下着の上から、メジャーを身体に沿わせて測ります。
横にスクロール
2. 仕上がり寸法表
デザイン上のゆとりを含めた、完成した衣服の寸法です。
横にスクロール
サイズ選択について
Select size corresponding to natural waist and full hip/seat measurements. If between sizes, choose the larger size and adjust side seams.
ゆとりについて
Generous wrap-around ease adjustable to any waist size via integrated wrap tie belts.
生地と用具
Cotton twill, chino, denim, linen, or wool suiting · None (0% stable woven)
- Cotton twill, chino, denim, linen, or wool suiting
- Pocketing cotton for pocket bags
| Size | 45 in / m | 45 in / yd | 60 in / m | 60 in / yd |
|---|---|---|---|---|
| XS – M | 2.6 | 2.85 | 2 | 2.2 |
| L – XL | 3 | 3.3 | 2.4 | 2.6 |
| 2XL – 3XL | 3.4 | 3.7 | 2.8 | 3.05 |
Notions
- Matching all-purpose polyester or cotton sewing thread
- Universal sewing needle (size 80/12)
- 7 inch metal or nylon trouser zipper
- Trouser hook and eye or 18mm button
- Interfacing for waistband
Tools
- Sewing machine
- Fabric shears
- Pins or fabric clips
- Steam iron and ironing board
裁断と型紙パーツ
10 mm (3/8 in) seam allowance.
15 mm (5/8 in) narrow double-fold hem along wrap edges and hem.
N/A (Wrap pants garment).
- Thai Wrap Leg Panel: Cut 1 Pair (1 Left, 1 Right) Generous wrap panel with continuous outseam wrap flaps
- Waist Wrap Tie Belts: Cut 2 Pairs in Self Fabric Fold and topstitch long ties for front and back closure
Press linen, rayon, or cotton fabric before cutting.
Align piece grainlines strictly parallel to fabric selvages.
Cut tie belts on straight of grain for strength.
Print Page 1 at 100% scale without page scaling. Check Metric box (50 mm x 50 mm) or Imperial box (2.0 in x 2.0 in = 50.8 mm) with a rigid ruler.
Align numbered registration marks and butt tile edges flush without overlapping untrimmed paper. Tape securely.
縫製手順
2
Assemble Waist Wrap Tie Belts
Fold each tie belt lengthwise right sides together. Stitch along long edge, turn right side out with a loop turner, press flat, and topstitch.
3
Stitch Continuous Crotch Seam
Place left and right wrap panels right sides together. Stitch continuous center crotch curve from front waist to back waist, reinforcing curve with a second pass.
4
Attach Tie Belts to Waist Corners
Pin prepared tie belts securely to the four outer top corners of the front and back wrap extensions. Stitch and bar-tack securely to reinforce stress points.
5
Hem Leg Openings
Turn up specified 15 mm hem allowance along bottom leg openings. Stitch, give pants a thorough steam press, and try on using authentic Thai wrap-and-tie technique.
困ったときは
Seams puckering along stitch line
Thread tension too high or needle blunt
Insert fresh needle and test balance on fabric scrap.
Wavy edge along curved perimeter
Edge was stretched while feeding into machine
Staystitch immediately after cutting and use walking foot.
出典とライセンス
FreeSewing (waralee-wrap-pants). Distributed under MIT / CC BY 4.0. Designer: Joost De Cock & FreeSewing Community.
MIT / CC BY 4.0 Joost De Cock & FreeSewing Community
https://github.com/freesewing/freesewing検証について
Parametric drafting geometry, seam balance, and grading verified with upstream open source community testing.
community-tested · verified
Joost De Cock & FreeSewing Community · Community Open Source Verification